Where to source replacement carb parts includijn screws? - SV650.org

Daveog · 28-05-16, 03:51 PM

Hi guys,

I had a search but couldn't find anything specific on carb bolts. I managed to remove, but pretty much destroy, the choke cable bracket screws when removing my K2 carburettors. I also noticed that the carb cover screws look in a bad way and Haynes say I need to replace the O rings on the choke cables. Aside from calling Suzuki who are miles away and presumably prohibitively expensive, any ideas where I could get these bits from - wemoto.com don't seem to do them?

Best wishes,

Dave

Bibio · 28-05-16, 04:12 PM

just use bottonhead alan bolts as replacements.

http://www.allensperformance.co.uk/ for parts, best to phone.

the reason the screws chewed is you need to use a proper good quality JIS screwdriver. philips screwdrivers 'cam out' resulting in chewed screws.

Bibio · 28-05-16, 04:18 PM

you really want to buy yourself the PH2 screwdriver in this link http://www.onlyqualitytools.com/cata...ewdrivers.html yes they are pricey but trust me when you need it you will thank me you have it.

Daveog · 28-05-16, 04:38 PM

Thanks very much! Is that a JIS screwdriver - it says Phillips? I had a look a couple of weeks ago for JIS screwdrivers, but the only place seemed to be online. Sadly the one in my toolkit on the bike doesn't have a handle.

Bibio · 28-05-16, 04:43 PM

yes it says philips but trust me its a JIS. it's a weird screwdriver as it fits almost every screw i have tried it on. it does not cam out of philips.

another good source of cheep JIS are the cheep ones you find in B&Q with the yellow or orange handles, not quite as good as jis but not as bad as philips. bit dont last long on them though so buy a few.

what i like about the one i posted is it has an 'out' impact as well so a decent tap with a hammer before trying to undo works a treat.

Daveog · 29-05-16, 11:16 AM

Now that sounds promising! Thanks!

28-05-16, 03:51 PM	#1
Daveog Member Join Date: Feb 2009 Posts: 247	Where to source replacement carb parts includijn screws? Hi guys, I had a search but couldn't find anything specific on carb bolts. I managed to remove, but pretty much destroy, the choke cable bracket screws when removing my K2 carburettors. I also noticed that the carb cover screws look in a bad way and Haynes say I need to replace the O rings on the choke cables. Aside from calling Suzuki who are miles away and presumably prohibitively expensive, any ideas where I could get these bits from - wemoto.com don't seem to do them? Best wishes, Dave __________________ 2002 SV650S K2 + 2005 CBR125-R (my 2009 SV650S Dark Grey K9 was stolen in Hextable 18/7/12 ) Last edited by Daveog; 28-05-16 at 03:53 PM.

28-05-16, 04:12 PM	#2
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: Where to source replacement carb parts includijn screws? just use bottonhead alan bolts as replacements. http://www.allensperformance.co.uk/ for parts, best to phone. the reason the screws chewed is you need to use a proper good quality JIS screwdriver. philips screwdrivers 'cam out' resulting in chewed screws.

28-05-16, 04:18 PM	#3
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: Where to source replacement carb parts includijn screws? you really want to buy yourself the PH2 screwdriver in this link http://www.onlyqualitytools.com/cata...ewdrivers.html yes they are pricey but trust me when you need it you will thank me you have it.

28-05-16, 04:38 PM	#4
Daveog Member Join Date: Feb 2009 Posts: 247	Re: Where to source replacement carb parts includijn screws? Thanks very much! Is that a JIS screwdriver - it says Phillips? I had a look a couple of weeks ago for JIS screwdrivers, but the only place seemed to be online. Sadly the one in my toolkit on the bike doesn't have a handle. __________________ 2002 SV650S K2 + 2005 CBR125-R (my 2009 SV650S Dark Grey K9 was stolen in Hextable 18/7/12 )

28-05-16, 04:43 PM	#5
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,540	Re: Where to source replacement carb parts includijn screws? yes it says philips but trust me its a JIS. it's a weird screwdriver as it fits almost every screw i have tried it on. it does not cam out of philips. another good source of cheep JIS are the cheep ones you find in B&Q with the yellow or orange handles, not quite as good as jis but not as bad as philips. bit dont last long on them though so buy a few. what i like about the one i posted is it has an 'out' impact as well so a decent tap with a hammer before trying to undo works a treat.

29-05-16, 11:16 AM	#6
Daveog Member Join Date: Feb 2009 Posts: 247	Re: Where to source replacement carb parts includijn screws? Now that sounds promising! Thanks! __________________ 2002 SV650S K2 + 2005 CBR125-R (my 2009 SV650S Dark Grey K9 was stolen in Hextable 18/7/12 )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Replacement parts - where from?	Pricey12	SV Talk, Tuning & Tweaking	7	13-03-13 10:52 AM
Can I use any carb model replacement engine?	Daveog	SV Talk, Tuning & Tweaking	7	10-11-11 01:19 PM
sv650 carb parts	Nicky S	For Sale - SV's and SV related items	2	30-08-10 04:37 PM
Looking for replacement screws for SV650S pointy screen	JohnMcL7	SV Talk, Tuning & Tweaking	10	22-08-09 02:22 PM
seized air screws on carb	aermacchi	SV Talk, Tuning & Tweaking	2	28-11-08 02:04 PM