Sourcing gear linkage - SV650.org

30-06-08, 11:54 AM

Anyone have any ideas on the length and if any other Suzuki models fit here. I am having some problems getting hold of one quickly. For a curvy.

Any aftermarket links would be appreciated.

Cheers,
Grant

30-06-08, 12:09 PM

the linkage rod or the whole peg, lever, etc?

30-06-08, 12:13 PM

The whole left hand rear set would be great - including the linkage. But if there is just this it would work for me as well.

30-06-08, 12:19 PM

The SRAD gear change fits, either 600 or 750.

There was also a dood on bay of evil selling titanium linkage rods, I had a thread about linkages will search...

30-06-08, 01:12 PM

Quote:

Originally Posted by Razor

The SRAD gear change fits, either 600 or 750.

There was also a dood on bay of evil selling titanium linkage rods, I had a thread about linkages will search...

Found him thanks - just need to work out some dimensions for him.

30-06-08, 01:15 PM

Quote:

Originally Posted by 21QUEST

Total Length=176mm

Threaded section at both ends=12.5mm

Diametre of rod=6mm

Ben

Lifted from my thread, with thanks again to Ben.

30-06-08, 02:42 PM

Brilliant - thanks Razor.

The guy Paul who makes them is on ebay - Username: underboat96

Custom one off in Titanium is £15 made today - with delivery tomorrow... pricey but efficient.

30-06-08, 04:45 PM

Probolt will sell you an alloy gear link rod and deliver it next day, handy too if you are one of those anodise everything type of people!

30-06-08, 11:54 AM	#1
Demonz Guest Posts: n/a	Sourcing gear linkage Anyone have any ideas on the length and if any other Suzuki models fit here. I am having some problems getting hold of one quickly. For a curvy. Any aftermarket links would be appreciated. Cheers, Grant

30-06-08, 12:09 PM	#2
Razor Guest Posts: n/a	Re: Sourcing gear linkage the linkage rod or the whole peg, lever, etc?

30-06-08, 12:13 PM	#3
Demonz Guest Posts: n/a	Re: Sourcing gear linkage The whole left hand rear set would be great - including the linkage. But if there is just this it would work for me as well.

30-06-08, 12:19 PM	#4
Razor Guest Posts: n/a	Re: Sourcing gear linkage The SRAD gear change fits, either 600 or 750. There was also a dood on bay of evil selling titanium linkage rods, I had a thread about linkages will search...

30-06-08, 02:42 PM	#7
Demonz Guest Posts: n/a	Re: Sourcing gear linkage Brilliant - thanks Razor. The guy Paul who makes them is on ebay - Username: underboat96 Custom one off in Titanium is £15 made today - with delivery tomorrow... pricey but efficient.

30-06-08, 04:45 PM	#8
Dangerous Dave Guest Posts: n/a	Re: Sourcing gear linkage Probolt will sell you an alloy gear link rod and deliver it next day, handy too if you are one of those anodise everything type of people!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gear linkage end	svrash	Stuff Wanted	2	23-08-07 09:07 AM
Gear linkage.	Jester666	SV Talk, Tuning & Tweaking	5	05-07-07 03:17 PM
Gear linkage - will one from an SV1000 fit?	Rock Hopper Penguin	SV Talk, Tuning & Tweaking	6	03-06-07 06:41 PM
Gear shifter linkage rod	Razor	SV Talk, Tuning & Tweaking	5	05-01-07 11:26 PM
Gear Linkage Adjustment - Should it be necessary ?	leegriffiths128	SV Talk, Tuning & Tweaking	1	05-04-05 08:55 PM