SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
|
Thread Tools |
21-10-18, 07:24 AM | #1 |
Member
Join Date: Sep 2013
Posts: 51
|
Back to standard?
Hi all,
I converted my curvy from clip ons to a naked handlebar and am thinking of changing it back. I'm currently using longer braided hoses than the standard lines and don't want to change the brake, clutch or throttle cables if I do change back to clip ons. anyone done this? if so have there been any issues with routing or clearance that you could offer advice on? If its going to be an issue then I'll probably leave it as is. |
22-10-18, 12:05 AM | #2 |
Guest
Posts: n/a
|
Re: Back to standard?
I reckon if they're sympathetically routed so you don't have any tight bends or twists it'd probably be OK, try it you can always stick the high bars back on if there's a problem.
|
22-10-18, 05:12 AM | #3 |
Member
Join Date: Sep 2013
Posts: 51
|
Re: Back to standard?
that's true, cheers pal
|
22-10-18, 05:47 PM | #4 |
Member
Mega Poster
Join Date: Jul 2003
Location: Doncaster, oop norf
Posts: 2,122
|
Re: Back to standard?
I always thought the clutch cable was a bit minimal to be honest, you cold lose the extra by making a less direct routing, as long as you aim nice and straight for the top of the clutch cover. Brake lines, no idea, depends how much extra you have. You could bring them up the left and across the bars perhaps to use up the inches.
|
22-10-18, 06:51 PM | #5 |
Member
Mega Poster
Join Date: Dec 2015
Location: Bristol
Posts: 1,200
|
Re: Back to standard?
Having just done the opposite I needed cables with about 70mm extra on them, so you will likely have approx 70mm excess, which should be easy to tame with a couple of cable ties.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Standard exhaust and standard bars for curvy | -scott- | Stuff Wanted | 4 | 03-09-12 08:03 PM |
Blue Flame End can, standard downpipes, standard filter. | yoda650 | SV Talk, Tuning & Tweaking | 2 | 20-06-11 04:28 PM |
Setting suspension back to standard | cringer | SV Talk, Tuning & Tweaking | 1 | 28-09-10 11:17 PM |
putting standard can back on? | hovis | SV Talk, Tuning & Tweaking | 5 | 02-08-07 08:03 PM |
Just put the standard shock back in... | northwind | SV Talk, Tuning & Tweaking | 32 | 17-01-06 11:15 AM |