Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola! Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Im Looking A Complete Main Section Wireing Loom For My 2004 Sv650 And Seen 1 On Ebay But It Says On It That The 03 Looms Are Different 2 The 04 Looms So Dose Any 1 No The Differenc Or Wot??
The Loom I Seen On Ebay Is Of An Injection Bike My Bike Is Also The Injection. |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
From what I am aware of there is no difference as there were only colour changes introduced between the 2 year models you mention.
Before buying though maybe wait for a second opinion or for the definitive answer pm his Royal Knowledgenes Sir Sid Squid. ![]() |
![]() |
![]() |
#3 | |
Guest
Posts: n/a
|
![]() Quote:
ok thanks for ur reply.i just wanted 2 check 1st incase i seen an 03 loom cheap and u say u dont think ther is any differenc??? so wot dose any 1 else think/no about them? |
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Ha, me again. The reason I am pretty convinced is that the 2004 model was out when I bought my new K3. There was no difference to the equipment the 2 bikes had, just at the time I preferred a silver one.
Maybe asking a mod to place this in tuning and tweaking would attract more attention mate. |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
They are NOT the same. The fuse box on the '03 model is located under the rider seat, but under the pilion seat on the '04 model.
|
![]() |
![]() |
#6 | |
Guest
Posts: n/a
|
![]() Quote:
so is that the only differenc???will the 04 bike run ok etc...with an 03 loom in it??? so all you have 2 do is put the fuse box else where? |
|
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
There are more differences (e.g. to the rear subframe, riders pegs, exhaust angle .....) but I couldn't answer if the electrics are the same. I'd guess that although the general layout may be the same, routing may be different, so you'd end up with a PITA trying to get it to fit.....
not sure though |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]()
Well I never, just goes to show. Glad our chap waited around for more input from other than me.
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#10 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
And what other connectors are going to be different just to be inconvenient?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
2003/2004 SV650s full lower fairings | wern | Bodywork | 9 | 09-04-12 04:49 AM |
Wiring looms | cammy | SV Talk, Tuning & Tweaking | 1 | 17-04-09 09:50 PM |
Any difference between K3 to K5 wiring ? | 21QUEST | SV Talk, Tuning & Tweaking | 2 | 06-05-08 11:20 AM |
will the 2003 sv650 master cylinder fit the 2004? | kcowgergmm | SV Talk, Tuning & Tweaking | 2 | 11-02-07 10:04 PM |
Crash.NET - MotoGP back into the fray, Malaysia test looms. | NewsBot | News | 0 | 20-01-07 04:40 PM |