Help with a can - SV650.org

20-08-09, 09:00 PM

will any of these be able to be fitted to a K3 Pointy??????

i have no doubts that these cans will go sky high so i dont want to buy one & find out its no use

1
http://cgi.ebay.co.uk/suzuki-gsxr-10...d=p3286.c0.m14

2
http://cgi.ebay.co.uk/Micron-Carbon-...d=p3286.c0.m14

3
http://cgi.ebay.co.uk/Micron-Carbon-...d=p3286.c0.m14

20-08-09, 09:01 PM

most cans are the same its the link pipe you got to get right.

Stu · 20-08-09, 10:42 PM

2 & 3 (the same) 51mm is quite standard so should be able to get a linkpipe. But you will need a link pipe & not sure how easy they are to get w/out a can as well.

20-08-09, 11:42 PM

just find out what size diamete the inlet is as most cans use 52mm but some microns have a 64mm i think it is. 52mm will be best as its easier to get link pipes in that size.

21-08-09, 05:43 AM

as long as you can source a link pipe the last two should fit easily

L3nny · 22-08-09, 10:41 AM

Banditmania used to do link pipes for the SV but can't seem to find them on their website anymore, they were about £50 IIRC

Other than that call the manufacturer of the can and see if they can sell you a link pipe seperately. I think Micron are no more though so you might struggle to get hold of them.

Other users on here have said that Beowulf and Carbon Can Company have been able to supply link pipes.

22-08-09, 10:56 AM

fuel do too iirc.

20-08-09, 09:00 PM	#1
Stewart.C Guest Posts: n/a	Help with a can will any of these be able to be fitted to a K3 Pointy?????? i have no doubts that these cans will go sky high so i dont want to buy one & find out its no use 1 http://cgi.ebay.co.uk/suzuki-gsxr-10...d=p3286.c0.m14 2 http://cgi.ebay.co.uk/Micron-Carbon-...d=p3286.c0.m14 3 http://cgi.ebay.co.uk/Micron-Carbon-...d=p3286.c0.m14

20-08-09, 09:01 PM	#2
kwak zzr Guest Posts: n/a	Re: Help with a can most cans are the same its the link pipe you got to get right.

20-08-09, 10:42 PM	#3
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	Re: Help with a can 2 & 3 (the same) 51mm is quite standard so should be able to get a linkpipe. But you will need a link pipe & not sure how easy they are to get w/out a can as well.

20-08-09, 11:42 PM	#4
T.M Guest Posts: n/a	Re: Help with a can just find out what size diamete the inlet is as most cans use 52mm but some microns have a 64mm i think it is. 52mm will be best as its easier to get link pipes in that size.

21-08-09, 05:43 AM	#5
Geoffrey Guest Posts: n/a	Re: Help with a can as long as you can source a link pipe the last two should fit easily

22-08-09, 10:41 AM	#6
L3nny Member Mega Poster Join Date: May 2008 Location: MK Posts: 2,111	Re: Help with a can Banditmania used to do link pipes for the SV but can't seem to find them on their website anymore, they were about £50 IIRC Other than that call the manufacturer of the can and see if they can sell you a link pipe seperately. I think Micron are no more though so you might struggle to get hold of them. Other users on here have said that Beowulf and Carbon Can Company have been able to supply link pipes. __________________ 2015 GS 1200 Adventure

22-08-09, 10:56 AM	#7
thefallenangel Guest Posts: n/a	Re: Help with a can fuel do too iirc.