Curvy bits needed - SV650.org

13-11-09, 11:39 AM

So after my recent off i have compiled a list of parts i need that can't be repaired so instead of jumping on ebay thought i would ask the mighty org, so if anyone has any laying about which there wiling to give...or sell give me a shout.

Also does anyone on here spray paint bikes? mine will need respraying so going to get the whole lot of plastics done, but as your all aware companys charge through the roof to spray parts, so was wondering if anyone here sprays them for cheaper.

All parts are for a 99 curvy

Needed:

Pair of indictators
Gear change lever
Side stand
Bar ends (maybe, might have some lying around in garage)

Also, depending on price

Front forks
Left front fairing
Mirrors
Belly pan

Also a quick question, are the front brake disks supposed to wobble if i try to wobble them? older brothers bike zx10 don't move no matter how hard you try.

Thanks guy, GB x

13-11-09, 11:57 AM

Quote:

Originally Posted by GeneticBubble

Also a quick question, are the front brake disks supposed to wobble if i try to wobble them? older brothers bike zx10 don't move no matter how hard you try.
[/COLOR][/COLOR][/COLOR]
Thanks guy, GB x

No, they should maybe just move if you really wrench on them, but wobble is far to much.

Have they done more than 30k?

13-11-09, 12:14 PM

Quote:

Originally Posted by petevtwin650

No, they should maybe just move if you really wrench on them, but wobble is far to much.

Have they done more than 30k?

Nope only 21k or so...

13-11-09, 03:57 PM

mine a pretty wobbley at 21k too, and are nearing the 4mm limit, brake fine though.

13-11-09, 08:58 PM

pm me your address ive got a standard screen u can have

13-11-09, 11:30 PM

is it oem inndicators your after?? if so which ones??

14-11-09, 01:08 PM

Quote:

Originally Posted by mikelcfc

is it oem inndicators your after?? if so which ones??

im just after any pair of matching indctors to be honest mate, not to worried about how they look can worry about that when i have more funds available.

14-11-09, 04:42 PM

have a pair of front oem ones, you can have if you wish,, the connectors on the wires are missing but are easy to solder on.. if you want them pm your address and you can have them.

20-11-09, 03:56 AM

gb due to this mess up with the iom i'll be posting the screen mid next week hope thats ok mate

26-11-09, 06:56 PM

Quote:

Originally Posted by davepreston

gb due to this mess up with the iom i'll be posting the screen mid next week hope thats ok mate

Thats fine mate, thanks again

Does anyone know if you can still get curvy lower fairings from anywhere other than someone else breaking there old bike?

13-11-09, 11:39 AM	#1
GeneticBubble Guest Posts: n/a	Curvy bits needed So after my recent off i have compiled a list of parts i need that can't be repaired so instead of jumping on ebay thought i would ask the mighty org, so if anyone has any laying about which there wiling to give...or sell give me a shout. Also does anyone on here spray paint bikes? mine will need respraying so going to get the whole lot of plastics done, but as your all aware companys charge through the roof to spray parts, so was wondering if anyone here sprays them for cheaper. All parts are for a 99 curvy Needed: Pair of indictators Gear change lever Side stand Bar ends (maybe, might have some lying around in garage) Also, depending on price Front forks Left front fairing Mirrors Belly pan Also a quick question, are the front brake disks supposed to wobble if i try to wobble them? older brothers bike zx10 don't move no matter how hard you try. Thanks guy, GB x Last edited by GeneticBubble; 13-11-09 at 09:34 PM.

13-11-09, 03:57 PM	#4
beabert Guest Posts: n/a	Re: Curvy bits needed mine a pretty wobbley at 21k too, and are nearing the 4mm limit, brake fine though.

13-11-09, 08:58 PM	#5
davepreston Guest Posts: n/a	Re: Curvy bits needed pm me your address ive got a standard screen u can have

13-11-09, 11:30 PM	#6
mikelcfc Guest Posts: n/a	Re: Curvy bits needed is it oem inndicators your after?? if so which ones??

14-11-09, 04:42 PM	#8
mikelcfc Guest Posts: n/a	Re: Curvy bits needed have a pair of front oem ones, you can have if you wish,, the connectors on the wires are missing but are easy to solder on.. if you want them pm your address and you can have them.

20-11-09, 03:56 AM	#9
davepreston Guest Posts: n/a	Re: Curvy bits needed gb due to this mess up with the iom i'll be posting the screen mid next week hope thats ok mate

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy bits and bobs needed	Jay12329	Stuff Wanted	7	31-03-09 10:59 AM
Curvy bits needed!	chasey	Stuff Wanted	8	20-03-09 07:02 PM
curvy bits needed	svtomo	Stuff Wanted	2	09-09-08 09:20 AM
Few bits needed Curvy SV	adam123	Stuff Wanted	1	01-03-08 10:38 PM
2000 curvy S bits needed	weazelz	Stuff Wanted	4	08-07-06 09:53 PM