Any plastics guys on here? - SV650.org

CheGuevara · 27-07-10, 02:00 PM

I've sent out a few emails to various companies requesting a quote on the following, but figure I'll check on here as well.

I need several cuts (will buy full sheets if absolutely necesssary) of 15mm marine-grade acrylic sheet, tinted (transparent) brown or grey:

2 pieces 80”x16”
2 pieces 62”x24”
4 pieces 45”x27”

Thanks,
-Mike

27-07-10, 02:03 PM

Try

http://www.k2a.co.uk/

Ask to speak to Ken Day and say Lozzo put you onto him.

Ken's a friend and I bought his 929 Fireblade from him a while back

Jayneflakes · 27-07-10, 02:16 PM

Lozzo, you know every one. Is it coz you is cuddly?

Bibio · 27-07-10, 02:23 PM

Quote:

Originally Posted by Jayneflakes

Lozzo, you know every one. Is it coz you is cuddly?

hahahahaha.. about as cuddly as a crocodile.

CheGuevara · 27-07-10, 02:37 PM

Quote:

Originally Posted by Lozzo

Try

http://www.k2a.co.uk/

Ask to speak to Ken Day and say Lozzo put you onto him.

Ken's a friend and I bought his 929 Fireblade from him a while back

Cheers, I'll give him a try.

27-07-10, 02:46 PM

Quote:

Originally Posted by Jayneflakes

Lozzo, you know every one. Is it coz you is cuddly?

No, it's because I make it my business to know who does what so I can save a fortune.

27-07-10, 02:46 PM

Quote:

Originally Posted by Bibio

hahahahaha.. about as cuddly as a crocodile.

I'll have you know I am a very nice and useful to know man

embee · 27-07-10, 06:31 PM

I've had stuff from http://www.theplasticshop.co.uk/plas...dex-614-0.html , they are local to me in Coventry.

28-07-10, 07:41 AM

I thought you meant proper plastics, PA, PP, HDPE, LDPE, ABS, TPU, TPE, POM, SAN. PS, PC, PET, PBT etc.
Polymers to be a little more accurate, Poly meaning many and Mer meaning units, Polymer many units of the same structure. Where as Monomer is a single unit. Now we could break this down into thermoset and thermoplastics (both semi crystaline and amorphus).

But that isn't that type of thread so I won't bore you with details. Just don't get me started on HOMOpolymers

Jayneflakes · 28-07-10, 12:51 PM

Quote:

Originally Posted by BigBaddad

I thought you meant proper plastics, PA, PP, HDPE, LDPE, ABS, TPU, TPE, POM, SAN. PS, PC, PET, PBT etc.
Polymers to be a little more accurate, Poly meaning many and Mer meaning units, Polymer many units of the same structure. Where as Monomer is a single unit. Now we could break this down into thermoset and thermoplastics (both semi crystaline and amorphus).

But that isn't that type of thread so I won't bore you with details. Just don't get me started on HOMOpolymers

Don't stop... I am nearly there..

27-07-10, 02:00 PM	#1
CheGuevara Member Join Date: Mar 2009 Posts: 478	Any plastics guys on here? I've sent out a few emails to various companies requesting a quote on the following, but figure I'll check on here as well. I need several cuts (will buy full sheets if absolutely necesssary) of 15mm marine-grade acrylic sheet, tinted (transparent) brown or grey: 2 pieces 80”x16” 2 pieces 62”x24” 4 pieces 45”x27” Thanks, -Mike __________________ - K9 SV650S: Hel brake lines, carbon end can - SZR660: The project... - K5 SV650S: K7 GSXR750 front end, ZX6RR shock, GB Moto rearsets, Hel brake lines, Renthal risers, Tuono bars, V-Rod headlamp, "JMV" belly pan ~SOLD~ (wonder where it is now)

27-07-10, 02:03 PM	#2
Lozzo Guest Posts: n/a	Re: Any plastics guys on here? Try http://www.k2a.co.uk/ Ask to speak to Ken Day and say Lozzo put you onto him. Ken's a friend and I bought his 929 Fireblade from him a while back Last edited by Lozzo; 27-07-10 at 02:04 PM.

27-07-10, 06:31 PM	#8
embee Member Mega Poster Join Date: Jul 2003 Location: Warwickshire Posts: 2,804	Re: Any plastics guys on here? I've had stuff from http://www.theplasticshop.co.uk/plas...dex-614-0.html , they are local to me in Coventry. __________________ "Artificial Intelligence is no match for natural stupidity"

28-07-10, 07:41 AM	#9
BigBaddad Guest Posts: n/a	Re: Any plastics guys on here? I thought you meant proper plastics, PA, PP, HDPE, LDPE, ABS, TPU, TPE, POM, SAN. PS, PC, PET, PBT etc. Polymers to be a little more accurate, Poly meaning many and Mer meaning units, Polymer many units of the same structure. Where as Monomer is a single unit. Now we could break this down into thermoset and thermoplastics (both semi crystaline and amorphus). But that isn't that type of thread so I won't bore you with details. Just don't get me started on HOMOpolymers Last edited by BigBaddad; 28-07-10 at 07:43 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
right side plastics K5	hindle8907	Stuff Wanted	2	21-08-09 08:46 AM
plastics	rictus01	Bikes - Talk & Issues	7	09-02-09 04:16 AM
Will K3 Plastics fit a K4?	Luckypants	SV Talk, Tuning & Tweaking	4	20-01-09 10:59 PM
riding without plastics	davepreston	SV Talk, Tuning & Tweaking	20	20-01-09 10:15 AM
Gimbel plastics anyone?	Jase22	SV Talk, Tuning & Tweaking	0	26-08-05 04:01 PM