cct help again

Hi all orgers

Need help with the front cct on my 1999 curvy.
its makeing a ticking noise so guessing it needs some adjusting

1 where is it? I had a quick look cant seem to find it, it was a very quick look.

2 how hard is it to adjust? do i need to remove it compleatly or can i do with it on the bike?

any help or a link to a step by step guide would be very helpfull

thanks in advance peeps.

this is the rear but the fronts the same on the lh side of the bike but there will be a spar from the frame that gets in the way, remove the cap circled and with a bike spoke ground down to make a flat head screw driver insert it into the hole and wind the tensioner back, once completely bacl let it shoot forward and reset itself, if it doesn't its goosed.

just screw it in or out?
do it up or undo it?

you can only screw it one way and when you release it it will pop out-its in the haynes