My (kinda) Shiny SV. Help me spot what's missing!

Hello!

So this is a quick look at my (new to me) Sv

After having a look at it today in anticipation of my springs and brake lines arriving, i have found that there are 4 holes on the underside of my seat unit that have nothing in them.
They seem to want to be holding the tail unit to the undertray?? If you know what they are and have a clue where i can find them please let me know ASAP!

I checked wemoto and motorcycleparts.co.uk and both came up with nothing :S


Uploaded with ImageShack.us



Uploaded with ImageShack.us
rawrrr why wont the pictures work! they are hosted on imageshack!

cant see pic at work but by your discription it either
plastic push/pop rivits that hold the fairing to the undertray (cost a few quid for 50 on evilbay)

first example i could find

http://cgi.ebay.co.uk/Plastic-Rivets...item4cf08759be


or if its in the centre of the undertray under rear pillon seat its to hold the ecu (which may have been moved if tailtidy or aftermarket undertray was once fitted)

Great success! Finally managed to work out how to at least get a thumbnail going!

I hope you can see it (this big hole in the blue fairing there are 4 of them), i think its the rivets that you mentioned.

Im currently trawling ebay as we speak to find some!!

[Nobbylad]

These fit, although I think the ones davepreston linked would as well.

http://cgi.ebay.co.uk/6mm-Snap-Push-...item439d40c874

Thanks a lot

Just bought a set...hope nothing falls off before then! :P

oh and if anyone has any experience with those crash bungs...please tell me how to get them off!!! They have a hole on the underside that has just become full of rust! I cant get an allen key in there and no screw driver is that small... :S they are unbranded and the one on the right side is bent so im planning to replace them with R&G if i can get the buggers off!

[SoulKiss]

Originally Posted by robbie09

Thanks a lot

Just bought a set...hope nothing falls off before then! :P

oh and if anyone has any experience with those crash bungs...please tell me how to get them off!!! They have a hole on the underside that has just become full of rust! I cant get an allen key in there and no screw driver is that small... :S they are unbranded and the one on the right side is bent so im planning to replace them with R&G if i can get the buggers off!

Nothing will fall off, they just provide some extra hold/alignment for the bottom of the panels/undertray