Curvy Starter motor - SV650.org

27-01-11, 11:23 PM

As above need a starter , must be in good condition and able to unscrew the terminal nuts as this is cause of mine breaking.

Need as soon as possible.

Ash.

yorkie_chris · 27-01-11, 11:31 PM

You want to send me yours and see if it can be repaired?

27-01-11, 11:39 PM

tbh i could probably repair it but none of the spanners i have are thin enough to get round the second nut.

Actually look at this, im not sure you can buy the insulating washers by themselves so im not sure.....

yorkie_chris · 27-01-11, 11:41 PM

Don't think you can, just make them.

28-01-11, 10:32 PM

Bump!

29-01-11, 12:57 AM

i'll be removing an engine tomorrow so will get back to you regarding the condition of the one i take off

h.

rictus01 · 29-01-11, 02:22 AM

as long as the armature is in good nick, the rest can be easily fixed, done about 15 of these myself, 3mm industrial rubber sheet for the washers and copper braid to replace the connection, the boly can be chopped off if it's totally fubar'd, but easy enough to lock the inside square block in place and use a spanner normally.

Cheers Mark.

27-01-11, 11:23 PM	#1
arcdef Guest Posts: n/a	Curvy Starter motor As above need a starter , must be in good condition and able to unscrew the terminal nuts as this is cause of mine breaking. Need as soon as possible. Ash.

27-01-11, 11:31 PM	#2
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Curvy Starter motor You want to send me yours and see if it can be repaired? __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

27-01-11, 11:39 PM	#3
arcdef Guest Posts: n/a	Re: Curvy Starter motor tbh i could probably repair it but none of the spanners i have are thin enough to get round the second nut. Actually look at this, im not sure you can buy the insulating washers by themselves so im not sure.....

27-01-11, 11:41 PM	#4
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Curvy Starter motor Don't think you can, just make them. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

28-01-11, 10:32 PM	#5
arcdef Guest Posts: n/a	Re: Curvy Starter motor Bump!

29-01-11, 12:57 AM	#6
husky03 Guest Posts: n/a	Re: Curvy Starter motor i'll be removing an engine tomorrow so will get back to you regarding the condition of the one i take off h.

29-01-11, 02:22 AM	#7
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	Re: Curvy Starter motor as long as the armature is in good nick, the rest can be easily fixed, done about 15 of these myself, 3mm industrial rubber sheet for the washers and copper braid to replace the connection, the boly can be chopped off if it's totally fubar'd, but easy enough to lock the inside square block in place and use a spanner normally. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvy starter motor parts?	Electro	SV Talk, Tuning & Tweaking	22	03-01-11 10:18 PM
Wanted curvy starter motor	mouse8197	Stuff Wanted	3	30-05-10 06:51 PM
Starter Motor	Grinch	Stuff Wanted	0	02-04-08 10:24 PM
Curvy and blue SK1 ate my starter motor	Tin Man	SV Talk, Tuning & Tweaking	1	27-06-06 02:48 PM
For curvy: Starter motor, carbs.	northwind	Stuff Wanted	7	26-11-05 12:18 AM