prob a thread that begins with h (turbo sv thou) - SV650.org

30-01-11, 03:08 AM

http://www.youtube.com/watch?v=a3DhH...eature=related

http://www.youtube.com/watch?v=-Bj8kq3Etj8&NR=1

http://www.youtube.com/watch?v=Y5vqp...eature=related

30-01-11, 09:31 AM

Don't do it.

You'll die.

30-01-11, 10:46 AM

Do it... maybe you're man enough to rev it to the point of making the turbo worthwhile, because it looked like neither of those two were (except the dyno guy, but there was a distinct lack of graph porn to follow it)

kaivalagi · 30-01-11, 10:56 AM

Surely you'll want a longer swinging arm

Looking at those vids I'd say the trick is doing it tidily!

30-01-11, 11:05 AM

You mean like BigCC racings new busa with an extra 18 inches...

To be fair, they're aiming for 1000hp though

30-01-11, 06:51 PM

Did anyone else cry out a little inside when he carelessly just threw his seat on the floor! No respect!

Also anyone else reckon that clearance is going to be a major impedance on his leaning? It seemed to protrude quite far and quite low down. I guess maybe its going to be mainly a drag bike rather than twisties!

andrewsmith · 30-01-11, 07:13 PM

I can see where this will end...

Hospital!

Dave do NOS, cheaper and more fun

30-01-11, 03:08 AM	#1
davepreston Guest Posts: n/a	prob a thread that begins with h (turbo sv thou) http://www.youtube.com/watch?v=a3DhH...eature=related http://www.youtube.com/watch?v=-Bj8kq3Etj8&NR=1 http://www.youtube.com/watch?v=Y5vqp...eature=related Last edited by davepreston; 30-01-11 at 03:15 AM.

30-01-11, 09:31 AM	#2
speedplay Guest Posts: n/a	Re: prob a thread that begins with h (turbo sv thou) Don't do it. You'll die.

30-01-11, 10:46 AM	#3
orose Guest Posts: n/a	Re: prob a thread that begins with h (turbo sv thou) Do it... maybe you're man enough to rev it to the point of making the turbo worthwhile, because it looked like neither of those two were (except the dyno guy, but there was a distinct lack of graph porn to follow it)

30-01-11, 10:56 AM	#4
kaivalagi Member Mega Poster Join Date: Jun 2010 Location: Norwich Posts: 1,955	Re: prob a thread that begins with h (turbo sv thou) Surely you'll want a longer swinging arm Looking at those vids I'd say the trick is doing it tidily!

30-01-11, 11:05 AM	#5
orose Guest Posts: n/a	Re: prob a thread that begins with h (turbo sv thou) You mean like BigCC racings new busa with an extra 18 inches... To be fair, they're aiming for 1000hp though

30-01-11, 06:51 PM	#6
Elltg Guest Posts: n/a	Re: prob a thread that begins with h (turbo sv thou) Did anyone else cry out a little inside when he carelessly just threw his seat on the floor! No respect! Also anyone else reckon that clearance is going to be a major impedance on his leaning? It seemed to protrude quite far and quite low down. I guess maybe its going to be mainly a drag bike rather than twisties!

30-01-11, 07:13 PM	#7
andrewsmith Member Mega Poster Join Date: Apr 2010 Location: Newcastle upon Tyne, Just south of salad dodging country Posts: 7,750	Re: prob a thread that begins with h (turbo sv thou) I can see where this will end... Hospital! Dave do NOS, cheaper and more fun __________________ RIP Reeder 20/07/1988 - 21/03/2012. Always missed squire!!! Every year we meet old friends, gain some new ones, lose old ones and you always remember them all. “Live as if you were to die tomorrow. Learn as if you were to live forever.” Mahatma Gandhi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Crash.NET - Paving begins at Indy.	NewsBot	News	0	03-11-07 12:30 PM
ticking/rattle begins at just over 4000rpm	SV650S_DUB	SV Talk, Tuning & Tweaking	5	04-08-07 03:25 PM
Passed my test, the learning begins!	TheStudent	Bikes - Talk & Issues	17	29-07-07 11:37 AM