cams both pointy and curvey - SV650.org

04-03-11, 09:06 PM

Just got a set of kent cams in my race bike, I had the cam swap setup before hand so now I have two sets of cams for sale, one injected set and one carby set. Can put up pics if requested.

The injection cams are a good upgrade for the carby engine and swapping the exhaust cams on an injected bike for the intakes on a carby is a very popular upgrade.

£80 a set posted.

07-03-11, 09:29 PM

£60 a set posted.

08-03-11, 10:08 PM

What sort of gains do you get putting injected cams in a carby?

Any lumpiness low down?

08-03-11, 10:27 PM

Quote:

Originally Posted by Gnome

What sort of gains do you get putting injected cams in a carby?

Any lumpiness low down?

Wouldn't be sure to be honest, check SV rider.com and twfracing.com the cam swaps are more popular in the USA. I put the carby intakes on my exhaust side of my injected engine, word is a gain of up to 3bhp to be had, I did it between seasons with other work so couldn't say exactly.

12-03-11, 02:01 PM

BTT

14-03-11, 05:23 PM

Mate, 60 quid sounds good.
I've just sent you a pm with more details!

14-03-11, 05:45 PM

I've heard its more like 7bhp on a curvy and 2hp if you do an eqivalent on a pointy.

Since I swapped mine its definetly noticeable.

With my gearing at Anglesea I could not rev out in top at the back straight, now it does just going into the braking zone.

BTW its a curvy.

Once I'm back from Almeria I'll get it dyno'd, before the cams it was 66.12bhp at wheel.

14-03-11, 09:13 PM

Injection cams now sold to Skeletor.

Carby ones still available £60 posted

19-03-11, 10:59 AM

btt

24-03-11, 06:18 PM

Both sets now sold. Thanks

04-03-11, 09:06 PM	#1
weecorey Guest Posts: n/a	cams both pointy and curvey Just got a set of kent cams in my race bike, I had the cam swap setup before hand so now I have two sets of cams for sale, one injected set and one carby set. Can put up pics if requested. The injection cams are a good upgrade for the carby engine and swapping the exhaust cams on an injected bike for the intakes on a carby is a very popular upgrade. £80 a set posted. Last edited by weecorey; 06-03-11 at 08:43 PM.

07-03-11, 09:29 PM	#2
weecorey Guest Posts: n/a	Re: cams both pointy and curvey £60 a set posted.

08-03-11, 10:08 PM	#3
Gnome Guest Posts: n/a	Re: cams both pointy and curvey What sort of gains do you get putting injected cams in a carby? Any lumpiness low down?

12-03-11, 02:01 PM	#5
weecorey Guest Posts: n/a	Re: cams both pointy and curvey BTT

14-03-11, 05:23 PM	#6
Skeletor Guest Posts: n/a	Re: cams both pointy and curvey Mate, 60 quid sounds good. I've just sent you a pm with more details!

14-03-11, 05:45 PM	#7
hardhat_harry Guest Posts: n/a	Re: cams both pointy and curvey I've heard its more like 7bhp on a curvy and 2hp if you do an eqivalent on a pointy. Since I swapped mine its definetly noticeable. With my gearing at Anglesea I could not rev out in top at the back straight, now it does just going into the braking zone. BTW its a curvy. Once I'm back from Almeria I'll get it dyno'd, before the cams it was 66.12bhp at wheel.

14-03-11, 09:13 PM	#8
weecorey Guest Posts: n/a	Re: cams both pointy and curvey Injection cams now sold to Skeletor. Carby ones still available £60 posted

19-03-11, 10:59 AM	#9
weecorey Guest Posts: n/a	Re: cams both pointy and curvey btt

24-03-11, 06:18 PM	#10
weecorey Guest Posts: n/a	Re: cams both pointy and curvey Both sets now sold. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pointy Cams	hardhat_harry	Stuff Wanted	5	15-11-10 12:52 AM
Pointy cams	scotty	Stuff Wanted	1	07-07-09 09:37 PM
Pointy cams in a Curvey...	G - renamed	SV Talk, Tuning & Tweaking	12	23-07-06 01:52 PM
Pointy Cams	G - renamed	Stuff Wanted	4	16-07-06 11:50 AM
SV 650 CAMS wanted K3-K6 injector pointy cams wanted	alien19779	Stuff Wanted	3	09-03-06 07:01 PM