SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
hi, when i was adjusting the chain and wheel alignment on my K8, the alignmant marker bracket turned as i was loosening the axle nut and scratched the swing arm. any ideas on the best way/ paint to sort this out? Cheers
|
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
you can touch it up for a quick fix but otherwise your looking at a repaint, pm if you need any advice and I'll help you best I can
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
To stop this happening I use a Carver or G-clamp with some thin wood in the jaws to clamp the marker bracket to the swingarm. I had this happen many moons ago on a 600 Bandit so when Diane got her SV650 I was ready for it. I did get a small pot of touch-up made to match but you could still see the damage if you looked really close.
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Mine had a little corrosion so I sanded it and repainted the area with silver wheel paint and you can hardly tell!
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing swing arm? | barwel1992 | SV Talk, Tuning & Tweaking | 7 | 31-10-10 04:32 PM |
Nice paint job or nasty paint job | dirtydog | Bikes - Talk & Issues | 28 | 04-08-09 03:26 PM |
Swing arm | Bill.Cross | SV Talk, Tuning & Tweaking | 5 | 07-12-08 08:30 AM |
Carbon Fiber - to paint or not to paint | PaulyMac | SV Talk, Tuning & Tweaking | 1 | 14-09-06 05:31 PM |
Paint code and where to find the paint | Paws | SV Talk, Tuning & Tweaking | 2 | 03-09-06 11:11 PM |