Gear Change Rod - SV650.org

21-10-11, 01:36 PM

It seems ive been a little forceful with my gear changes lately, and the gear change rod is now quite bent

. Can anyone recommend an aftermarket one I can get, or maybe a part number/site I can get an OEM replacement? For a K6 if it makes any difference. Thanks alot.

mister c · 21-10-11, 02:04 PM

Here you go

http://www.robinsonsfoundry.co.uk/co...650xclutch.htm

Nobbylad · 21-10-11, 02:05 PM

Couldn't you just straighten it?

21-10-11, 02:10 PM

Quote:

Originally Posted by mister c

Here you go

http://www.robinsonsfoundry.co.uk/co...650xclutch.htm

Sorry I wasnt clear, its the rod connecting the gear change lever to the splined spindle, not the spindle itself.

Quote:

Originally Posted by Nobbylad

Couldn't you just straighten it?

I suppose I could try but it would more than likely just bend again pretty easily, and if possible id rather get a better quality one.

Edit

Having looked on the robinsons website ive found the OEM part in the gear changing section. I would still prefer an aftermarket, better quality, one if possible, if anyone knows of any?

For reference to others, the part numbers are;

25525-05A10 - GEAR SHIFT ROD (L 175) - FAIRED MODELS

25525-19F00 - GEAR SHIFT ROD (L 150) - UNFAIRED MODELS

Link to Robinsons gear change section;
http://www.robinsonsfoundry.co.uk/co...xgearshift.htm

mister c · 21-10-11, 02:30 PM

http://www.ebay.co.uk/itm/SUZUKI-SV-...item5ae1d90ec9

21-10-11, 02:32 PM

Thanks, but its nearly cheaper to buy a brand new one. Im a bit concerned if I do buy another OEM one ill just bend it again though?

Bibio · 21-10-11, 03:56 PM

simple solution... stop stamping on it while changing down.

21-10-11, 04:01 PM

I really dont think I do stamp on it at all, but it seems to have bent somehow.

21-10-11, 01:36 PM	#1
Cursed Guest Posts: n/a	Gear Change Rod It seems ive been a little forceful with my gear changes lately, and the gear change rod is now quite bent . Can anyone recommend an aftermarket one I can get, or maybe a part number/site I can get an OEM replacement? For a K6 if it makes any difference. Thanks alot. Last edited by Cursed; 21-10-11 at 02:11 PM.

21-10-11, 02:04 PM	#2
mister c Member Mega Poster Join Date: Feb 2007 Location: Crewe, Cheshire Posts: 2,326	Re: Gear Change Rod Here you go http://www.robinsonsfoundry.co.uk/co...650xclutch.htm __________________ Flickr: http://www.flickr.com/photos/croozenooze/ Facebook : https://www.facebook.com/colin.hughes.1213?ref=tn_tnmn Yoo Toob https://www.youtube.com/channel/UCjG...eMWUx4Ud2dK-yA

21-10-11, 02:05 PM	#3
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Gear Change Rod Couldn't you just straighten it?

21-10-11, 02:30 PM	#5
mister c Member Mega Poster Join Date: Feb 2007 Location: Crewe, Cheshire Posts: 2,326	Re: Gear Change Rod http://www.ebay.co.uk/itm/SUZUKI-SV-...item5ae1d90ec9 __________________ Flickr: http://www.flickr.com/photos/croozenooze/ Facebook : https://www.facebook.com/colin.hughes.1213?ref=tn_tnmn Yoo Toob https://www.youtube.com/channel/UCjG...eMWUx4Ud2dK-yA

21-10-11, 02:32 PM	#6
Cursed Guest Posts: n/a	Re: Gear Change Rod Thanks, but its nearly cheaper to buy a brand new one. Im a bit concerned if I do buy another OEM one ill just bend it again though?

21-10-11, 03:56 PM	#7
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Gear Change Rod simple solution... stop stamping on it while changing down.

21-10-11, 04:01 PM	#8
Cursed Guest Posts: n/a	Re: Gear Change Rod I really dont think I do stamp on it at all, but it seems to have bent somehow.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gear change problem-can't get past 2nd gear	muzikill	SV Talk, Tuning & Tweaking	8	14-03-10 10:10 PM
Gear Change	butterick99	SV Talk, Tuning & Tweaking	2	12-05-08 07:20 AM
Gear change problem-can't get past 2nd gear	muzikill	SV Ecosse	8	13-09-07 07:45 PM