Hagon Monoshock-Fits Pointy SV. - SV650.org

DJ123 · 23-08-12, 07:29 PM

***SOLD*** ***SOLD*** ***SOLD*** ***SOLD*** ***SOLD*** ***SOLD*** ***SOLD*** ***SOLD*** ***SOLD*** ***SOLD***

For Sale; Hagon Monoshock. DIRECT FIT TO SV-NO MODIFICATION NEEDED. I have recently removed it from my K3. I don't know how old the shock is, however i know it is in good condition and works well. The spring is good and the damper & rod operates as it should do (I've never adjusted the damper)

http://www.hagon-shocks.co.uk/catalo...?PartNo=M63066

Nobbylad · 23-08-12, 07:46 PM

Dibs please while I check out some details

DJ123 · 23-08-12, 08:27 PM

No worries.

Nobbylad · 25-08-12, 09:54 AM

No can do I'm afraid. Good luck with the sale though!

SoulKiss · 25-08-12, 02:27 PM

Grrr if only this was next week, I'd know better if I can afford it - think I might have a new job, but still to get confirmation in writing.

If you can sit on this for a few days, I can let you know by mid to end of next week?

DJ123 · 25-08-12, 03:25 PM

Yeah no worries, no takers on it as it stands so far.

Gaz.sv650 · 25-08-12, 07:21 PM

Hey do you no what weight rider this would suite?

DJ123 · 25-08-12, 07:33 PM

Taken from the Hagon site:
Hagon Shock Absorbers have a wide load carrying range and will be delivered with the spring pre-load set for an average weight rider (75-100Kg). Before fitting the new shock absorber to the bike, please ensure that the swinging arm and any linkages are lubricated, move freely and are without excessive play.

The fitting of any Hagon Shock absorber should be carried out by a professional and the fixing bolts and nuts should be tightened correctly using locking fluid where necessary. All fasteners should be set to the original manufacturer's torque settings.

Important: Fit the Hagon shock absorber with the Logo or Part Number label up the correct way. Before fitting check the bushes match the size of the bushes on the existing shock absorber. After fitting, make sure all wires, cables or pipes are clear of the suspension unit.

So my guess is that it is capable of a good varying range of weight. I've tried to google the spring compression rate, but haven't found any figures

Gaz.sv650 · 25-08-12, 08:24 PM

Ok thanks mate I am Intrested will pm you when I know for sure if I can do it should be able to let you know tomorrow evening or Monday

DJ123 · 25-08-12, 08:29 PM

no probs, let me know. I'm free all day tomorrow and Monday

23-08-12, 07:29 PM	#1
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Hagon Monoshock-Fits Pointy SV. *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* For Sale; Hagon Monoshock. DIRECT FIT TO SV-NO MODIFICATION NEEDED. I have recently removed it from my K3. I don't know how old the shock is, however i know it is in good condition and works well. The spring is good and the damper & rod operates as it should do (I've never adjusted the damper) http://www.hagon-shocks.co.uk/catalo...?PartNo=M63066 __________________ BMW F800ST Last edited by DJ123; 27-08-12 at 08:32 PM.

23-08-12, 08:27 PM	#3
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Hagon Monoshock-Fits SV No worries. __________________ BMW F800ST

25-08-12, 09:54 AM	#4
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Hagon Monoshock-Fits SV No can do I'm afraid. Good luck with the sale though!

25-08-12, 02:27 PM	#5
SoulKiss Member Mega Poster Join Date: Jul 2006 Location: Sunny Croydonia Posts: 6,124	Re: Hagon Monoshock-Fits SV Grrr if only this was next week, I'd know better if I can afford it - think I might have a new job, but still to get confirmation in writing. If you can sit on this for a few days, I can let you know by mid to end of next week? __________________ Sent from my PC NOT using any Tapatalk type rubbish!! █╬╬╬╬(•)i¯i▀▀▀▀▀█Ξ███████████████████████████████)

25-08-12, 03:25 PM	#6
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Hagon Monoshock-Fits SV Yeah no worries, no takers on it as it stands so far. __________________ BMW F800ST

23-08-12, 07:46 PM	#2
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Dibs please while I check out some details

25-08-12, 07:21 PM	#7
Gaz.sv650 Member Join Date: Feb 2011 Location: worcester Posts: 361	Re: Hagon Monoshock-Fits SV Hey do you no what weight rider this would suite? Last edited by Gaz.sv650; 25-08-12 at 07:28 PM.

25-08-12, 07:33 PM	#8
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Hagon Monoshock-Fits SV Taken from the Hagon site: Hagon Shock Absorbers have a wide load carrying range and will be delivered with the spring pre-load set for an average weight rider (75-100Kg). Before fitting the new shock absorber to the bike, please ensure that the swinging arm and any linkages are lubricated, move freely and are without excessive play. The fitting of any Hagon Shock absorber should be carried out by a professional and the fixing bolts and nuts should be tightened correctly using locking fluid where necessary. All fasteners should be set to the original manufacturer's torque settings. Important: Fit the Hagon shock absorber with the Logo or Part Number label up the correct way. Before fitting check the bushes match the size of the bushes on the existing shock absorber. After fitting, make sure all wires, cables or pipes are clear of the suspension unit. So my guess is that it is capable of a good varying range of weight. I've tried to google the spring compression rate, but haven't found any figures __________________ BMW F800ST

25-08-12, 08:24 PM	#9
Gaz.sv650 Member Join Date: Feb 2011 Location: worcester Posts: 361	Re: Hagon Monoshock-Fits SV Ok thanks mate I am Intrested will pm you when I know for sure if I can do it should be able to let you know tomorrow evening or Monday

25-08-12, 08:29 PM	#10
DJ123 Member Mega Poster Join Date: Jul 2011 Location: Somewhere over there Posts: 3,245	Re: Hagon Monoshock-Fits SV no probs, let me know. I'm free all day tomorrow and Monday __________________ BMW F800ST

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pointy MonoShock Linkage Re-Build Kit	rob321	For Sale - SV's and SV related items	0	23-06-12 09:38 AM
Hagon progressives, pointy, 03> £40	johnmaciver32	For Sale - SV's and SV related items	0	02-10-11 02:24 PM
Hagon progressive springs.... for pointy	Bibio	For Sale - SV's and SV related items	4	28-10-08 11:06 PM
Pointy K&N filter Also fits SV1000 Link here:	RGV250ads	For Sale - SV's and SV related items	0	16-06-08 11:33 AM
Genuine Hugger Pointy black Fits K4> I think	Wadda	For Sale - SV's and SV related items	2	18-05-08 08:54 PM