Where are the restrictor washers?

Hi all,
im sure his has been done about a 1000 times but i need to know.

I have a sk4 and should have the airbox washers and throttle stop fitted.
Throttle stop is defo on there
but i had the top of the airbox off yesterday and couldnt see any washers can anyone tell me where they should be i looked in the bottom of the box and could see the top of the throttle bodies (i think) so i turned on battery lights and what i was looking at moved so i assume they are the auto choke.

If they are then where are the washers. If they havent been fitted i will be well peeeeeed of as i got charged £175 for supply and fit of the kit when i bought the bike from a dealer in southend that has been in the town for years.

If anyone has a piccy on them fitted to there bike that would be great as im thick...

Many thanks for any help.

[Sid Squid]

The washers are on the other side of the throttle bodies - between them and the intake rubber on the cylinder head.

Disco2,

If its anything like what was fitted on my k3 they are located between
The air box and throttle bodies u need to remove the airbox completely
Not just the top u should see them mine were marked up alpha
And the same with the throttle stop.
Hope this helps
Jewkc

jewkc hi mate would i see them from the top of the box with the air filter out or does the hole box have to be out to see them.
Mine if an alpha kit so i would have thought they would be in the same place.

Tbh disco2 i cnt quite remember if i cud see them u will definately see it wen the air box is removed i have got a pic of mine out of the bike if u want to pm me ur email address i can mail it you

Cheers jewkc

cool thanks mate.

[Tomor]

You can see them with the air filter removed. will be quite obvious if they are in there.

So i thought but mine has none unless they are fitted else where because when i had air filter out
i could not see them

As said above they don't go under the airbox. They go between the TB and engine it's self.

Thanks guys i have found them.
I was confused as the fitting paper work i was given with the cert shows that they should be fitted in the underside of the air box.
Is fitting them under the TB a better place to fit them ??
I must admit im tempted to remove them and let the engine breath properly as it is restricted on the throttle any way.