SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Member
Mega Poster
Join Date: Jul 2005
Location: Dunfermline
Posts: 1,712
|
![]()
http://www.pinkmotors.hu/did/arlista...o_szerszam.pdf
Great tutorial btw. And i hacksawed the old one off without having to use a grinder, was a doddle. Chain is this.. ![]() Having some issues flaring the pinhead, tool bought off ebay now looks like this after attempting to flare... ![]() I take it coz it's a cheap tool? It looks like the coned area that it supposed to flare failed due to being cheese soft. ![]() The plate went on no probs btw, im not entirely sure the ends are flanged enough. ![]() ![]() ![]() I didn't go out on it today as i feel it isn't fully done, i made sure the tool was aligned & tightened it like heck. The links aren't tight so ok so far. My feeling is cheap tool failed (or the wrong tool was used as the pdf may suggest for the chain type). I don't wether to buy another flange pin for the tool or ride it down to the local garage & get them to do it (this is the last thing i want to do as i want to get this done myself and it means a bit of f*nnying around to put it in on wednesday) or if some kind soul in my area has the right tool to crimp it because that's all it needs now.
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ![]() K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed. Last edited by muzikill; 05-05-13 at 03:23 PM. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Replacement chain adjusters | lazymanc | SV Talk, Tuning & Tweaking | 0 | 08-04-09 12:03 PM |
Cam chain replacement - is that normal? | Knaapie | SV Talk, Tuning & Tweaking | 19 | 09-11-08 10:27 PM |
Chain & Sprocket replacement | inspectorgadget | SV Talk, Tuning & Tweaking | 54 | 27-11-07 12:31 PM |
Do I have to take off the swing arm for chain replacement? | budrosmith | SV Talk, Tuning & Tweaking | 18 | 29-01-07 06:57 PM |
chain and sprocket replacement | sv650gerbrit | SV Talk, Tuning & Tweaking | 5 | 11-05-06 09:48 AM |