Penske 8987 3-way race shock, suit 12-13st rider - SV650.org

Nobbylad · 22-04-14, 10:00 AM

Serviced May 2013 - sprung for a 12-13st rider (#525).

Fits some Gixers too.

Over a grand brand new. http://www.penskeshocks.co.uk/motorc...r/damper/3way/

£450 delivered.

Nobbylad · 29-06-14, 07:27 PM

....and by the way, this makes the rear tyre stick to the road like shurhit to a blanket.

650 · 08-07-14, 02:35 PM

got a model number? website application list isn't working and I'd be interested as to whether this would fit the thousand.

Nobbylad · 08-07-14, 02:37 PM

http://www.reactivesuspension.com/do...TION_CHART.pdf

Pretty sure it fits the thou.

YC could confirm.

Nobbylad · 08-07-14, 04:29 PM

How heavy are you with your gear on?

Nobbylad · 08-07-14, 05:13 PM

From what I have seen, SV1000 shock is 330mm, this is 335mm, however there is some adjustment on the bottom linkage if you wanted to get it bang on.

650 · 08-07-14, 09:36 PM

I've got my VFR in for a fukk work over, valve clearances, carb balance etc...

depending on how much I have left, I'll let you know if I can afford to have it off you.

Can anyone confirm if all the fixtures and fittings are the same or will modification be required?

Nobbylad · 08-07-14, 09:53 PM

Should be bolt straight in.

650 · 09-07-14, 10:54 AM

Ok matey, got your PM and will be in touch this weekend. The VFR's due quite a bit of work so the labour charge will likely be high. It's all riding on that tbh, will reply to your PM when I know more.

Nobbylad · 18-08-14, 08:14 AM

Bump

22-04-14, 10:00 AM	#1
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Penske 8987 3-way race shock, suit 12-13st rider Serviced May 2013 - sprung for a 12-13st rider (#525). Fits some Gixers too. Over a grand brand new. http://www.penskeshocks.co.uk/motorc...r/damper/3way/ £450 delivered. Last edited by Nobbylad; 18-08-14 at 08:14 AM.

29-06-14, 07:27 PM	#2
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Penske 8987 3-way race shock, suit 12-13st rider ....and by the way, this makes the rear tyre stick to the road like shurhit to a blanket.

08-07-14, 02:35 PM	#3
650 Member Mega Poster Join Date: May 2012 Location: South East London Posts: 1,095	Re: Penske 8987 3-way race shock, suit 12-13st rider got a model number? website application list isn't working and I'd be interested as to whether this would fit the thousand. __________________ 93 VFR750 - WAY too many mods to list. Crashed 04 SV1000 - Bar end mirrors. Belly pan. Seat cowl. K4 GSXR600 K6 front end and custom top yoke. R6 Brembo MC

08-07-14, 02:37 PM	#4
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Penske 8987 3-way race shock, suit 12-13st rider http://www.reactivesuspension.com/do...TION_CHART.pdf Pretty sure it fits the thou. YC could confirm.

08-07-14, 05:13 PM	#6
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Penske 8987 3-way race shock, suit 12-13st rider From what I have seen, SV1000 shock is 330mm, this is 335mm, however there is some adjustment on the bottom linkage if you wanted to get it bang on.

08-07-14, 04:29 PM	#5
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Penske 8987 3-way race shock, suit 12-13st rider How heavy are you with your gear on?

08-07-14, 09:36 PM	#7
650 Member Mega Poster Join Date: May 2012 Location: South East London Posts: 1,095	Re: Penske 8987 3-way race shock, suit 12-13st rider I've got my VFR in for a fukk work over, valve clearances, carb balance etc... depending on how much I have left, I'll let you know if I can afford to have it off you. Can anyone confirm if all the fixtures and fittings are the same or will modification be required? __________________ 93 VFR750 - WAY too many mods to list. Crashed 04 SV1000 - Bar end mirrors. Belly pan. Seat cowl. K4 GSXR600 K6 front end and custom top yoke. R6 Brembo MC

08-07-14, 09:53 PM	#8
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Penske 8987 3-way race shock, suit 12-13st rider Should be bolt straight in.

09-07-14, 10:54 AM	#9
650 Member Mega Poster Join Date: May 2012 Location: South East London Posts: 1,095	Re: Penske 8987 3-way race shock, suit 12-13st rider Ok matey, got your PM and will be in touch this weekend. The VFR's due quite a bit of work so the labour charge will likely be high. It's all riding on that tbh, will reply to your PM when I know more. __________________ 93 VFR750 - WAY too many mods to list. Crashed 04 SV1000 - Bar end mirrors. Belly pan. Seat cowl. K4 GSXR600 K6 front end and custom top yoke. R6 Brembo MC

18-08-14, 08:14 AM	#10
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: Penske 8987 3-way race shock, suit 12-13st rider Bump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Penske 2-way shock (8983)	Nobbylad	For Sale - SV's and SV related items	10	11-01-14 07:34 PM
Penske 8987 triple clicker shock, suit 12-13st rider	Nobbylad	For Sale - SV's and SV related items	7	12-11-13 10:48 AM
Penske 8987 triple clicker shock	Nobbylad	For Sale - SV's and SV related items	16	01-05-13 11:01 AM
Penske shock for pointy	Lateksi	Stuff Wanted	0	20-09-11 06:45 PM
Penske Shock Service UK	TSM	Bikes - Talk & Issues	7	11-06-10 09:27 AM