standard undertray modifying - SV650.org

02-02-05, 08:35 PM

i am thinking about modifying my standard undertray by removing all the excessive plastic and the no plate lamp and replacing it with a bracket to carry the plate and indicators, its a 2002 sk2. just wondering if anybody has tried this and whether it looks any good? any pics or advise would be much appreciated.

02-02-05, 08:56 PM

I didn't mod it that far the first time round. But I did cut it down a bit.

02-02-05, 10:12 PM

It looks grand, and is pretty easy to do. Ill take some pics at the weekend and send them to ya if ya want, as its easier to explain where to make the cuts if you have a piccy. I cut the whole lot down, and made a small Ally bracket which holds the no.plate tight under the rear lamp at a nice angle. I also ditched the number plate light, and cut and shut the original rear light lens with some clear plastic to enable that to be used as the plate light. Looks proper now. Pics shall come soon.

Dan

02-02-05, 10:34 PM

Quote:

Originally Posted by BigApe

You can't cut much more than that. I cut mine to the level of the undertray itself. Trimmed the indicator mounts and the rear flap all the way to the plate bracket.

However I have a Suzuki undertray to fit so I'll be selling my cut down undertray and then anybody who wants it can buy it. Free then to slice away and keep their own undertray stock for later selling on.

02-02-05, 11:09 PM

Thanx for the tips, i will persue further. i would like to see those pics dan_sv if you wouldn't mind. cheers guys.

03-02-05, 06:03 PM

Burner, its not too difficult to make the standard undertray a lot more cut down than that with a little easy fabrication.

I will take some decent pics at the weekend I promise.......

Where can I get them hosted?

Cheers Dan

03-02-05, 06:09 PM

How about this one:

[img]http://homepage.ntlworld.com/junej.hendry/scottishsv650site/images/****.jpg[/img]

More details on www.sv650.tk

03-02-05, 07:31 PM

that looks fantastic! just printed off the template, that should keep me busy!

04-02-05, 03:58 PM

Let us know how u get on.

06-02-05, 10:43 PM

Right, I have taken some pics, does anyone have any suggestions for a good (free) site to get them hosted at? There are quite a few.

Dan.

02-02-05, 08:35 PM	#1
cassius Guest Posts: n/a	standard undertray modifying i am thinking about modifying my standard undertray by removing all the excessive plastic and the no plate lamp and replacing it with a bracket to carry the plate and indicators, its a 2002 sk2. just wondering if anybody has tried this and whether it looks any good? any pics or advise would be much appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Curvey standard undertray	ZXRich	Stuff Wanted	2	23-08-07 02:13 PM
Standard pointy undertray!	markmoto	Stuff Wanted	5	12-08-07 01:50 PM
Standard undertray for curvy Urgent	gc350	Stuff Wanted	1	03-04-07 08:54 PM
Wanted: Standard undertray for 99-01 model	MilleonAir	Stuff Wanted	1	05-01-07 04:25 PM
Standard undertray for K2 curvey	minifun	Stuff Wanted	0	15-12-06 05:01 PM

02-02-05, 08:56 PM	#2
Stig Guest Posts: n/a	I didn't mod it that far the first time round. But I did cut it down a bit.

02-02-05, 10:12 PM	#3
Dan_SV Guest Posts: n/a	It looks grand, and is pretty easy to do. Ill take some pics at the weekend and send them to ya if ya want, as its easier to explain where to make the cuts if you have a piccy. I cut the whole lot down, and made a small Ally bracket which holds the no.plate tight under the rear lamp at a nice angle. I also ditched the number plate light, and cut and shut the original rear light lens with some clear plastic to enable that to be used as the plate light. Looks proper now. Pics shall come soon. Dan

02-02-05, 11:09 PM	#5
cassius Guest Posts: n/a	Thanx for the tips, i will persue further. i would like to see those pics dan_sv if you wouldn't mind. cheers guys.

03-02-05, 06:03 PM	#6
Dan_SV Guest Posts: n/a	Burner, its not too difficult to make the standard undertray a lot more cut down than that with a little easy fabrication. I will take some decent pics at the weekend I promise....... Where can I get them hosted? Cheers Dan

03-02-05, 06:09 PM	#7
Mervin Guest Posts: n/a	How about this one: [img]http://homepage.ntlworld.com/junej.hendry/scottishsv650site/images/****.jpg[/img] More details on www.sv650.tk

03-02-05, 07:31 PM	#8
cassius Guest Posts: n/a	that looks fantastic! just printed off the template, that should keep me busy!

04-02-05, 03:58 PM	#9
Mervin Guest Posts: n/a	Let us know how u get on.

06-02-05, 10:43 PM	#10
Dan_SV Guest Posts: n/a	Right, I have taken some pics, does anyone have any suggestions for a good (free) site to get them hosted at? There are quite a few. Dan.