Where do you fit it? - SV650.org

TSM · 09-03-05, 12:25 PM

Where do you fit the scottoiler on the K1-2 so it has a good access for refilling?

Which pipe do splice from the carbs for the scottoiler connection?

09-03-05, 12:25 PM

Not sure about where to get the vacumn but from what people have said the left panel under the seat is a good place for the reservoir.

09-03-05, 12:28 PM

Quote:

Originally Posted by Carsick

Not sure about where to get the vacumn but from what people have said the left panel under the seat is a good place for the reservoir.

I have my lubeman just under the left hand black pannel.. though I don't know if a Scotoiler would fit.

TSM · 09-03-05, 01:54 PM

I had a look at the space during lunch, it does look a bit cramped, and seems like the cover will not close properly.

I cant put it under my front or rear seat as i have loads of stuff in there.

I have thought that it might be best placed under the rear undertray.

09-03-05, 02:11 PM

Try the main site, there's a how to on the subject.

spudnuts.

09-03-05, 03:34 PM

Anyone got any idea where you could fit a touring one on a K4 with hugger? Ideally, I'd want to be able to remove the stock rear fender at a later date, without messing it up.

09-03-05, 05:21 PM

Quote:

Originally Posted by Grinch

Quote:

Originally Posted by Carsick

Not sure about where to get the vacumn but from what people have said the left panel under the seat is a good place for the reservoir.

I have my lubeman just under the left hand black pannel.. though I don't know if a Scotoiler would fit.

How do you get the panel off to squeeze the bottle? On my SV, they're fastened with a socket-head screw at the bottom and a 'trim' clip at the back.

fizzwheel · 09-03-05, 09:48 PM

On the left hand side just past the lock to release the pillion seat mounted on the plastic bodywork by the pillion footrest

Was on there when I bought the bike

northwind · 10-03-05, 01:21 AM

Mine used to just be in the boot- it was there when I got it- but it used to get unprimed all the time and was generalyl a hassle... I moved it behind hte wee black plastic thing same as everyone else- there's a tapped hole the right size for the reservoir bracket to fit into (though it's a pain getting it set up nicely) I've never got the side panels on so it's dead easy to see- but even if you do have them it only takes 10 secodns to take them off and check.

10-03-05, 08:40 AM

Quote:

Originally Posted by chazzyb

Quote:

Originally Posted by Grinch

Quote:

Originally Posted by Carsick

Not sure about where to get the vacumn but from what people have said the left panel under the seat is a good place for the reservoir.

I have my lubeman just under the left hand black pannel.. though I don't know if a Scotoiler would fit.

How do you get the panel off to squeeze the bottle? On my SV, they're fastened with a socket-head screw at the bottom and a 'trim' clip at the back.

it sit's just 'below' the pannel, on the sub frame, its out of view but accessable. I'm going to try to sort some pics this weekend as I need to clean the chain anyway.

09-03-05, 12:25 PM	#1
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Where do you fit it? Where do you fit the scottoiler on the K1-2 so it has a good access for refilling? Which pipe do splice from the carbs for the scottoiler connection? __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

09-03-05, 01:54 PM	#4
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	I had a look at the space during lunch, it does look a bit cramped, and seems like the cover will not close properly. I cant put it under my front or rear seat as i have loads of stuff in there. I have thought that it might be best placed under the rear undertray. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

09-03-05, 09:48 PM	#8
fizzwheel Super Moderator Mega Poster Join Date: Dec 2003 Location: Somerset Posts: 3,614	On the left hand side just past the lock to release the pillion seat mounted on the plastic bodywork by the pillion footrest Was on there when I bought the bike __________________ Look Dave, I can see you're really upset about this. I honestly think you ought to sit down calmly, take a stress pill, and think things over. K5 GSXR 750 Anniversary Edition

10-03-05, 01:21 AM	#9
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Mine used to just be in the boot- it was there when I got it- but it used to get unprimed all the time and was generalyl a hassle... I moved it behind hte wee black plastic thing same as everyone else- there's a tapped hole the right size for the reservoir bracket to fit into (though it's a pain getting it set up nicely) I've never got the side panels on so it's dead easy to see- but even if you do have them it only takes 10 secodns to take them off and check. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

09-03-05, 12:25 PM	#2
Carsick Guest Posts: n/a	Not sure about where to get the vacumn but from what people have said the left panel under the seat is a good place for the reservoir.

09-03-05, 02:11 PM	#5
spudnuts Guest Posts: n/a	Try the main site, there's a how to on the subject. spudnuts.

09-03-05, 03:34 PM	#6
Ceri JC Guest Posts: n/a	Anyone got any idea where you could fit a touring one on a K4 with hugger? Ideally, I'd want to be able to remove the stock rear fender at a later date, without messing it up.