fitting an rsend onto k4 - SV650.org

20-04-06, 08:12 PM

about to fit an rsend onto my k4, was wondering if anyone has done this and is there anything i should bear in mind? has anyone come across complications doing this?

20-04-06, 08:21 PM

doesn't it come with instructions ?

Hamicads do

It's quite easy, should only take an hour or so. The tricky bit is bending the undertray to get it back together

Speedy · 20-04-06, 09:45 PM

I've got an Evotech tail-tidy,instructions sounded daunting,and alot had to be removed but it was easy!!!

21-04-06, 05:45 PM

it should do, haven't got it through yet. just wondered cos i tend to take to things with a hammer when it dont go quite right.

it seemed in the best interest of my bike to ask the question. childish i know but what can you do.

Speedy · 21-04-06, 05:51 PM

All you have to do is take your time,enjoy it,and relax! And if that don't work then get your hammer!
No it really is an easy strip down!

22-04-06, 03:35 PM

The hardest bit is getting the black push rivets out from the inside so you can the remove the rear quarter panels, you need small hands to get in there and alot a patience and tough fingers to !!!

22-04-06, 08:13 PM

Lucky for me mine rivets fell out a while ago. Maybe I hould do something about that.

How's the build quality of the Hamicad?

23-04-06, 09:11 AM

Very well made from stainless steel and black powder coated fitted easy within an hour

this is the deal i got

http://www.hamicad.co.uk/Discount.html

20-04-06, 08:12 PM	#1
will costello Guest Posts: n/a	fitting an rsend onto k4 about to fit an rsend onto my k4, was wondering if anyone has done this and is there anything i should bear in mind? has anyone come across complications doing this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HID fitting (yes again, sorry)	Brettus	SV Talk, Tuning & Tweaking	65	24-01-09 06:45 PM
DIY Can Fitting	Jackhammer	SV Talk, Tuning & Tweaking	14	15-02-08 01:12 PM
Fitting a Motrax Rsend Tailtidy	SAMMY650	SV Talk, Tuning & Tweaking	1	02-10-07 01:48 PM
Fitting CCC	cuffy	SV Talk, Tuning & Tweaking	57	27-01-06 09:36 PM
Tail Tidy(Rsend) pics and help???	mario	Photos	16	06-09-05 07:49 PM

20-04-06, 08:21 PM	#2
Mr Toad Guest Posts: n/a	doesn't it come with instructions ? Hamicads do It's quite easy, should only take an hour or so. The tricky bit is bending the undertray to get it back together

20-04-06, 09:45 PM	#3
Speedy Member Mega Poster Join Date: Apr 2006 Location: Biggin Hill,Kent Posts: 1,074	I've got an Evotech tail-tidy,instructions sounded daunting,and alot had to be removed but it was easy!!!

21-04-06, 05:45 PM	#4
will costello Guest Posts: n/a	it should do, haven't got it through yet. just wondered cos i tend to take to things with a hammer when it dont go quite right. it seemed in the best interest of my bike to ask the question. childish i know but what can you do.

21-04-06, 05:51 PM	#5
Speedy Member Mega Poster Join Date: Apr 2006 Location: Biggin Hill,Kent Posts: 1,074	All you have to do is take your time,enjoy it,and relax! And if that don't work then get your hammer! No it really is an easy strip down!

22-04-06, 03:35 PM	#6
Lee Rainbow Guest Posts: n/a	The hardest bit is getting the black push rivets out from the inside so you can the remove the rear quarter panels, you need small hands to get in there and alot a patience and tough fingers to !!!

22-04-06, 08:13 PM	#7
nuntius Guest Posts: n/a	Lucky for me mine rivets fell out a while ago. Maybe I hould do something about that. How's the build quality of the Hamicad?

23-04-06, 09:11 AM	#8
Lee Rainbow Guest Posts: n/a	Very well made from stainless steel and black powder coated fitted easy within an hour this is the deal i got http://www.hamicad.co.uk/Discount.html