SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi guys,
After not using my bike for a week I started this morning and all fine. When I put it in gear it stalled. (The sidestand was up and clutch in!!!) When I restarted it, it was still in gear, the bike pulled forward slightly. It was like the clutch was out slightly. Are these symptoms a poorly adjusted clutch or is it something more serious? Thanks, Andy |
![]() |
![]() |
#2 | |
Member
Mega Poster
Join Date: Jul 2003
Location: In the shadows to the left
Posts: 7,700
|
![]() Quote:
HTH |
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
it is completely normal to feel some drag like that while the oil is still cold and heavy viscosity
if it still does it once all warmed up, check clutch adjustment |
![]() |
![]() |
#4 |
Member
Mega Poster
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,071
|
![]()
Check your oil level,and consider if oil needs a change.Mine starts to do that if I leave the oil in more than 4000 miles.
__________________
On a clear day we stand there and look further than the ordinary eye can see. |
![]() |
![]() |
![]() |
#5 |
The Sick Man
Mega Poster
Join Date: Nov 2004
Location: Peckham.SE.LDN
Posts: 4,768
|
![]()
Sometimes happens to me if i shift into gear very soon after starting the bike. I mostly start the bike in gear with the front brake on when i start so i dont notice the problem much.
If the bike has been standing for a while then all the oil drips off the clutch plates drying them, as they are under presure from the springs it makes them all stick together even when the clutch is disengaged.
__________________
OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions |
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Thanks guys, it had been stood for a week and I havent noticed it when it is warmed up so looks like just one of those things.
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does an Easy Clutch exist? | bikerteacher | SV Talk, Tuning & Tweaking | 18 | 16-04-08 10:29 AM |
Clutch problems. | chakraist | SV Talk, Tuning & Tweaking | 13 | 03-02-08 06:03 PM |
Clutch replacement, easy enough? | ELR4ever | SV Talk, Tuning & Tweaking | 12 | 21-12-07 03:17 PM |
Clutch problems? | PWNDLOL | SV Talk, Tuning & Tweaking | 1 | 05-07-06 07:10 AM |
How easy is it to replace the clutch cable | red5 | SV Talk, Tuning & Tweaking | 7 | 03-07-06 02:02 AM |