SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Argh, thought we had sorted this on my sv but its come back!
![]() Have very little front brake on my curvy, was like it when i got her, spent ages in garage getting them to sort it-got her home, all sorted-that was Sept last year. Last couple of days its faded again! help! Its been bled, had new pads, new seals etc. I can almost get it back to the bar before bike fully stops, ![]() ![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
I know you have blead them but it sounds like you still have some air in the system! Try cable tying the lever back over night and see if that cures it.
BILLY |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
ive done that before, it helps but it soon comes back
![]() im going to try and find a new master cylinder and see if that has any effect. |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
Master cylider servicing kit about £18 or something like that... fixed mine. Use a cable-tie to keep the leaver closed over night and if the brakes are sharp when you first use them and fade over the day then its likely to be that.
|
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
Sounds like you *may* have the retracting piston syndrome I seem to have. Despite new seals in calipers and master cylinder + new braided lines, I still have more lever travel than I'd like before the brakes bite. They then work very well indeed. It's just one of my calipers that seems to be the problem. When I bought the bike (4 years ago now), I had the lever adjuster set to 4 for my small hands. I've now got it on 1 so the lever doesn't come back too far when braking grabbing a handfull.
I don't know the answer either... |
![]() |
![]() |
#6 | |
Guest
Posts: n/a
|
![]() Quote:
![]() |
|
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
Maybe the suz peeps are right and there is something dodgy with your cables.
|
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
Very odd... Have you tried keeping the leaver closed overnight?
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTD - rear brake lever, front brake lever, r & G crash bung, | nik_nunez | Stuff Wanted | 0 | 17-10-08 08:27 PM |
Front Brake - Rear Brake? | Stradders | Bikes - Talk & Issues | 35 | 17-09-08 04:44 PM |
K3 front brake lever, Front indicator (RH), Front Mirror(RH), Bar End (RH) | leegriffiths128 | Stuff Wanted | 0 | 23-07-08 09:11 PM |
Front brake not activating brake light properly | SVeeedy Gonzales | SV Talk, Tuning & Tweaking | 5 | 27-02-07 12:09 PM |
brake light flickers when the front brake pulled in - K4 | dclifford | SV Talk, Tuning & Tweaking | 9 | 05-09-05 10:39 AM |