![]() |
#31 |
Guest
Posts: n/a
|
![]()
And why do I need to use 'codes'?
![]() I saw the front end in Ebay.com - make my bid and won. Receive it with USPS International and when I take it to pieces I saw that the top yoke is cracked.... I don't know what's the reason for this crack and no one can tell me.... Why is necessary to be stolen? It's impossible to be cracked in crash? |
![]() |
![]() |
#32 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
It can happen if bike falls over with the steering lock on too.
I wouldn't worry about it, too late to do anything about it now.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#33 |
Guest
Posts: n/a
|
![]()
So, to the questions...
The "GSXR-1000" K4 brake and clutch levers on "GSXR-600/750" K5 brake master cylinder and clutch support? The "SV650" K4 rear sprocket on "GSXR-600" K5 rear sprocket carrier? |
![]() |
![]() |
#34 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Look on B and c express site and see part numbers on sprocket. If they are different it probably won't fit.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#35 |
Guest
Posts: n/a
|
![]()
Different.... again
![]() |
![]() |
![]() |
#36 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Ok you will need to play with that then.
Try put your sprocket carrier on GSXR wheel. I know curvy is nothing like GSXR600K2, but maybe you will be lucky. If not, you need to play around. Has wheel got a tyre on it? Will it fit in the swingarm?* *Streetfighters project SV has some problems with tyre fouling swingarm at front apparently.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#37 |
Guest
Posts: n/a
|
![]()
I already try "SV" sprocket carrier to "GSXR" wheel and it didn't fit. Also the cushions are smaller (tiny).
Wheel is without tyre and i didn't try to put it in the swingarm. Did you mean that i must buy a new wheel? ![]() |
![]() |
![]() |
#38 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
No I mean you must try it and see if there is a problem.
What tyre does GSXR take? How wide is rim?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#39 |
Guest
Posts: n/a
|
![]()
The rim is 5,5" wide for 180/55-17 tyre.
I'll try it in the weekend... |
![]() |
![]() |
#40 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
Should be OK. People have put bandit 1200 wheel in which is that size.
What size is GSXR chain? 525 or 520?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
650R Launched in March | Dal | Bikes - Talk & Issues | 66 | 15-05-06 06:18 PM |
Bike Test USA - ER6 (Ninja 650R) vs SV650 | SV650S_DUB | Bikes - Talk & Issues | 3 | 10-05-06 03:55 PM |