 |
 |
15-11-09, 08:33 PM
|
#51 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Gsvxr-650r
Revalve it if you want it to work perfect, but then you need to replace nitrogen.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
15-11-09, 08:52 PM
|
#52 |
|
Guest
Posts: n/a
|
Re: Gsvxr-650r
I can't do this in Bulgaria
 Not me, of course, but the mechanics and technicians didn't have the proper equipment.... or they have some, which is better to say they don't have I measure the "Gubellini" spring and it didn't fit to "GSXR" rear shock, it's only 14,5cm., or I must use teflon sleeve 
Last edited by Kuku; 15-11-09 at 08:54 PM. |
|
|
|
16-11-09, 03:34 PM
|
#53 |
|
Guest
Posts: n/a
|
Re: Gsvxr-650r
Today I found (by the hard way) that the "SV" rear sprocker carrier and especially the rear sprocket didn't fit to "GSXR" rear wheel at all....
I also found in PazzoRacing site that the "GSXR-600/750" K4-K5 Brake lever are interchangeable with next years "GSXR", "ZX-6R" 05-06 and "Daytona 675". Clutch lever will fit from all "GSXR-600/750" 2000 to 2005 and "GSXR-1000" 2000 to 2004..... or this is only for Pazzo?!
|
|
|
|
16-11-09, 03:43 PM
|
#54 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Gsvxr-650r
If pazzo is same then OEM should be same too. SHOULD be, not definite
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
16-12-09, 09:10 PM
|
#55 |
|
Guest
Posts: n/a
|
Re: Gsvxr-650r
Hi, guys
 I dig out the thread, because i take some parts from painting. Frame.      Swingarm.   Tail.   The collor is black metallic.  I also bought one "Ohlins" rear spring, which unfortunately is too short for "GSXR-600" K5 rear shock - "Ohlins" spring is 160mm. and original spring is about 190-200mm. ....and a pair of brand new "Ohlins" front springs 
|
|
|
|
16-12-09, 09:12 PM
|
#56 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Gsvxr-650r
Rate is more important than brand with spring.
What do you weigh? Frame looks good, even if it is wrong shape 
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
|
17-12-09, 08:53 AM
|
#57 |
|
Guest
Posts: n/a
|
Re: Gsvxr-650r
93 kilograms or about 205 pounds.
I try to find out spring rate for this part number 08656-10/1476 but unsuccessfully. |
|
|
|
17-12-09, 09:05 AM
|
#58 |
|
Guest
Posts: n/a
|
Re: Gsvxr-650r
Kuku, looking good
shame about the spring, can you get a refund and find the correct size spring?
|
|
|
|
17-12-09, 09:15 AM
|
#59 |
|
Guest
Posts: n/a
|
Re: Gsvxr-650r
I bought spring from Ebay and it's difficulty to ship back and wait for refund - I'll try to sell it here next season.
|
|
|
|
17-12-09, 10:30 AM
|
#60 |
|
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
Re: Gsvxr-650r
Look on top of spring, they sometimes etch it into top. I think ideal for you would be .9kg/mm at guess.
What is stock rate in those forks?
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 650R Launched in March | Dal | Bikes - Talk & Issues | 66 | 15-05-06 06:18 PM |
| Bike Test USA - ER6 (Ninja 650R) vs SV650 | SV650S_DUB | Bikes - Talk & Issues | 3 | 10-05-06 03:55 PM |
