What would you like to see made for the SV?

What about saddle shutters. (Blanks that fill in the holes when you remove the Grab Handle)

Originally Posted by hongman

Shorty levers?

+1 although i would want some the work with the RSV brembo master cylinder

[DarrenSV650S]

Strong, chain adjusting plates that don't twist around the swingarm would be nice

Originally Posted by DarrenSV650S

Strong, chain adjusting plates that don't twist around the swingarm would be nice

Darren if you bend the bottom bits up so they are tight against the swing arm they cant spin round, well mine dont

[DarrenSV650S]

Yeh mine were tight. It was when a mechanic over-tightened the swingarm. Then the next guy to work on it couldn't budge the nut it was that tight. Then when he did get it moving it took the adjuster with it.
But they are very weak. They sometimes bend a bit when I undo it

Ok,

We can make stuff in aluminium and delrin (a type of tough plastic/nylon)

So the list to date is:

1. Funky/sexy topyokes for SV's with clipons (identical in everyway to dizzyblondes....only joking)

2. Swingarm cover plates/bobbins
3. Rear footpeg hangers
4. Billet rear tourque arms - maybe
5. Mirror spacers
6. Some fairing spacers/brackets - Maybe tricky, but can look at it.
7. GPS/phone mounts attached to clipons
8. Footpeg lowering plates - adjustable - very easy to do.
9. swingarm adjuster plates - designed well so they dont twist

Wow...anything else!

We need an SV in the workshop for dimensions...any offers in or around lancashire, unless you want to travel

[Jayneflakes]

Originally Posted by Owenski

Dunno if it's possible out of the material you use but what about producing front spindles which would allow for the gsxr front end mod but keeping the current sv wheel this would be to avoid the requirement of a speedo sensor mod.

This does appeal, so hurry up and buy a lathe!

Originally Posted by liathich

+1 for footpeg lowering brackets with more than one set of adjustment holes.

This also appeals, I have real difficulties some days with the standard pegs. The joy of being an old bag is that on some days, I can't get my feet down!

[Bibio]

as long as i get them back i can send you a complete set (on card) bracket set for k3> fairings with instructions of what bits go where so you can copy.

if i dont get them back you will have a very angry kilt wearing nutter at your door

Originally Posted by Bibio

as long as i get them back i can send you a complete set (on card) bracket set for k3> fairings with instructions of what bits go where so you can copy.

if i dont get them back you will have a very angry kilt wearing nutter at your door

Ha ha, i tell you what send me a photo of them first if possible so i can work out whats needed. It would be useful to have the brackets here but on a bike as it may be the best way to make them is not the suzuki way.

Send me a photo.

How diffucult are levers to do Matt?

Pazzos are way overpriced and the copies floating about arent great from what I can tell. Mostly fitting issues.