![]() |
#291 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,569
|
![]()
group buy is now closed.
those that are not on the list wanting brackets will have to contact me direct via PM. DfourN and ChrisCTK will have till wednesday to contact me with their postage details as per PM. if i have made a mistake by taking you off the list and you have indeed sent me your details then accept my apology and send me a PM. i will PM everyone on the list payment instructions within the next couple of days. Standard Brackets without Scottoiler downstand: 1..joshwalker094.......Non-Scottoiler .(Post to Nobbylad) 2..Shawthing...........Non-Scottoiler .(Post to Nobbylad) 3..Elliott Woodruff....Non-Scottoiler .(Post to Nobbylad) 4..MJC-DEV.............Non-Scottoiler 5..The Guru............Non-Scottoiler 6..The Guru............Non-Scottoiler 7..SIII................Non-scottoiler 8..Davy.h..............Non-Scottoiler 9..Speedy..............Non-Scottoiler 10.originlabs..........Non-Scottoiler 11.Speedyctr...........Non-Scottoiler 12.ImplodedHamster.....Non-Scottoiler 13.AkiraSV.............Non-Scottoiler 14.CodeJACK............Non-Scottoiler 15.speareig............Non-Scottoiler 16.lazymanc............Non-Scottoiler 17.Dave20046...........Non-Scottoiler .(collect at GM) 18.Winder..............Non-scottoiler 19.Rowdy...............Non-Scottoiler 20.Svsam...............Non-scottoiler 21.Crash19999..........Non-scottoiler 22.Zen Beetle..........Non-Scottoiler 23.Badeye..............Non-Scottoiler 24.Sniff...............Non-Scottoiler 25.ulsy................Non-Scottoiler 26.gt900u..............Non-Scottoiler 27.Swiss Andy..........Non-Scottoiler 28.rav101..............Non-Scottoiler 29.jchu1988............Non-Scottoiler 30.Epic Monkey.........Non-Scottoiler 31.DfourN..............Non-Scottoiler 32.ChrisCTK............Non-Scottoiler 33.tetol...............Non-Scottoiler 34.Fluffer.............Non-Scottoiler Brackets with a Scottoiler downstand: 1..DarrenSV650S............Scottoiler 2..Nobbylad................Scottoiler .(Post to Nobbylad) 3..Steve_God...............Scottoiler .(Post to Nobbylad) 4..muzikill................Scottoiler 5..Kilted Ginger...........Scottoiler 6..Jayneflakes.............Scottoiler 7..peterco.................Scottoiler 8..Sputnik.................Scottoiler 9..federer.................Scottoiler 10.Artful..................Scottoiler 11.Soulkiss................Scottoiler 12.whistler................Scottoiler 13.Beetrootkiller..........Scottoiler 14.Aidan...................Scottoiler 15.Punkyp..................Scottoiler 16.Madnlooney..............Scottoiler 17.Stormingjoe.............Scottoiler 18.Fozzy...................Scottoiler 19.JamesMio................Scottoiler 20.Eulaca..................Scottoiler Thanks, Lance Last edited by Bibio; 25-06-12 at 05:10 PM. |
![]() |
![]() |
![]() |
#292 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,569
|
![]()
Jayne you will need this http://www.scottoiler.com/uk/Spares-...ypage.tpl.html the downstand was designed to use this. scottoiler use an 8mm jubilee clip to secure the pipe to the bracket but you could use 2 small cable ties instead.
those already with a scottoiler will need to remove the dispenser bobbin bracket and attach to the back of the downstand of the bracket then angle it again. to everyone with the oiler downstand you will need to leave some slack in the pipework to allow the nib to move with the bracket. |
![]() |
![]() |
![]() |
#293 |
Member
Mega Poster
Join Date: Apr 2008
Location: Newport on Tay
Posts: 1,017
|
![]()
well done to Lance
nice to see that all your hard work is appreciated by the number of people asking for the item.
__________________
i'm not old i'm experienced!! http://www.german-shepherd-rescue-scotland.org.uk/ everyone deserves a second chance RIP Appollo miss you and will always love you x x x x |
![]() |
![]() |
![]() |
#294 |
Guest
Posts: n/a
|
![]()
Sounds good put me down for a set
Cheers |
![]() |
![]() |
#295 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,569
|
![]()
one happy customer has left my house with the first of the brackets. so if he crashes then no one will be getting any if he don't then you all can have them.
they fit better than i had hoped and i even surprised myself as there was zero play on either end of the spindle and the swingarm. there was no movement on the brackets while adjusting the chain unlike the OEM ones where it's a guestimate with no bending putting on and taking off after several attempts. yes they are solid ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#296 |
Member
Mega Poster
Join Date: Jun 2008
Location: West Lancs
Posts: 4,055
|
![]()
Oooooh!....shiney shiney!
|
![]() |
![]() |
![]() |
#297 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,569
|
![]()
i'm now happy enough that i can start excepting payments.
which means that everyone should have theirs by the end of next week at the latest, this is entirely dependent on folks with payment. this has been fun and has kept me out of mischief and as i said before, it's not about the money it's about being able to do it and knowing i have made people happy. the price is the price because i have friends in the right places who are more than happy to help me do these kind of things. i designed them they make it happen and all i have done is the running about and fettling. |
![]() |
![]() |
![]() |
#298 |
Guest
Posts: n/a
|
![]()
I will forward the money at any point. My set is to be sent to Nobbylad anyway
![]() |
![]() |
![]() |
#299 | ||
Member
Mega Poster
Join Date: Feb 2008
Location: an etherial plain, far far away
Posts: 2,142
|
![]() Quote:
![]() Quote:
Thank you for this, they look amazing and I cannot wait to fit them. Your hard work has been appreciated. If you were closer to Weston I would subject you to a Jayney hug! ![]() |
||
![]() |
![]() |
![]() |
#300 |
Member
Join Date: Feb 2010
Location: Dagenham
Posts: 724
|
![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
potential pointy ecu restrictor kit bargain | haydensv650 | Stuff Wanted | 0 | 18-08-11 07:40 PM |
Replacement chain adjuster plates? | SV400Rob | SV Talk, Tuning & Tweaking | 13 | 02-02-11 09:30 PM |
chocolate chain adjuster plates | dmracing | SV Talk, Tuning & Tweaking | 6 | 01-08-09 09:23 PM |
Chain adjuster plates | dmracing | Stuff Wanted | 6 | 24-07-07 05:54 PM |
Stainless adjuster plates.....................bling | svrash | SV Talk, Tuning & Tweaking | 19 | 23-04-06 07:22 PM |