Potential pointy Adjuster Plates Group Buy - Page 46 - SV650.org

Jayneflakes · 13-07-12, 02:21 PM

Quote:

Originally Posted by bladesuk1

when you do, please put me down for a set with the scottoiler attachment (although i'll be using a tutoro). and from reading through the rest of the thread, i think you deserve some lazy time

b

They work fabulously well with a Tutoro, I use one too, Pic in this thread somewhere.

I even sent a link to this thread to Tutoro so they could see what was being done.

13-07-12, 02:23 PM

Receive today look fantastic, shame i binned the bike eh! :P

bladesuk1 · 13-07-12, 02:56 PM

Quote:

Originally Posted by Jayneflakes

They work fabulously well with a Tutoro, I use one too, Pic in this thread somewhere.

I even sent a link to this thread to Tutoro so they could see what was being done.

funnily enough, that's how i found this thread in the first place!

am i right in thinking that you're using the scottoiler dispenser plate adapter, by the way? and that i won't need to use the tutoro helix with this, and that only the single-sided feed will be required?

b

muzikill · 13-07-12, 03:58 PM

Fitted today. Thanks Lance

well chuffed & time to buy a tutoro now someone else has confirmed it works with it (pics?)

I wonder if suzuki uk has caught onto these yet?

Jayneflakes · 13-07-12, 04:03 PM

Quote:

Originally Posted by bladesuk1

funnily enough, that's how i found this thread in the first place!

am i right in thinking that you're using the scottoiler dispenser plate adapter, by the way? and that i won't need to use the tutoro helix with this, and that only the single-sided feed will be required?

b

Cool, was it on the Tutoro Forum?

In answer to your question, yes I am using a Scot Oiler dispenser plate which I now have held in place with a piece of heat shrink. The feed tube sits nicely in place with out the Tutoro wire. I only use the single feed because I have the auto and it provides plenty of lube to my chain. I did not feel the need to use my twin feed.

Jayneflakes · 13-07-12, 04:09 PM

Quote:

Originally Posted by muzikill

Fitted today. Thanks Lance

well chuffed & time to buy a tutoro now someone else has confirmed it works with it (pics?)

Pics of mine on page 38. I use a Tutoro Auto, mounted on my swing arm, just in front of my hugger.

Bibio · 13-07-12, 04:26 PM

Quote:

Originally Posted by Jayneflakes

yes I am using a Scot Oiler dispenser plate which I now have held in place with a piece of heat shrink.

what a clever idea. i would never have thought of that. so your not just a pretty face after all

Jayneflakes · 13-07-12, 06:14 PM

Quote:

Originally Posted by Bibio

what a clever idea. i would never have thought of that. so your not just a pretty face after all

I used the heat shrink to tie it on and used a double bow as the knot!

am clever me...

Toooldtodie · 14-07-12, 05:27 PM

What news on a new batch? Will be changing chain and sprockets in the next few months and would like to replace OE adjuster plates with a properly engineered set not made out of Cruddite. They work and look the nuts too, excellent!!

Bibio · 14-07-12, 05:39 PM

batch will be ready end of next week or sooner.

13-07-12, 02:23 PM	#452
Elliott Guest Posts: n/a	Re: Potential pointy Adjuster Plates Group Buy Receive today look fantastic, shame i binned the bike eh! :P

13-07-12, 03:58 PM	#454
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: Potential pointy Adjuster Plates Group Buy Fitted today. Thanks Lance well chuffed & time to buy a tutoro now someone else has confirmed it works with it (pics?) I wonder if suzuki uk has caught onto these yet? __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

14-07-12, 05:27 PM	#459
Toooldtodie Member Join Date: Jun 2012 Location: Chelmsford Posts: 410	Re: Potential pointy Adjuster Plates Group Buy What news on a new batch? Will be changing chain and sprockets in the next few months and would like to replace OE adjuster plates with a properly engineered set not made out of Cruddite. They work and look the nuts too, excellent!! __________________ Thought I was in a bad mood, but it's been 30 years now, so I suppose it's just who I am. 05 SV650s now with proper suspension, hurrah!

14-07-12, 05:39 PM	#460
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Potential pointy Adjuster Plates Group Buy batch will be ready end of next week or sooner.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
potential pointy ecu restrictor kit bargain	haydensv650	Stuff Wanted	0	18-08-11 07:40 PM
Replacement chain adjuster plates?	SV400Rob	SV Talk, Tuning & Tweaking	13	02-02-11 09:30 PM
chocolate chain adjuster plates	dmracing	SV Talk, Tuning & Tweaking	6	01-08-09 09:23 PM
Chain adjuster plates	dmracing	Stuff Wanted	6	24-07-07 05:54 PM
Stainless adjuster plates.....................bling	svrash	SV Talk, Tuning & Tweaking	19	23-04-06 07:22 PM