svbits.co.uk showcase - Page 10 - SV650.org

Bibio · 25-02-15, 11:05 PM

i'll have kits ready mid next week.

the kit has everything including the adjuster plates. the only thing i dont supply is something to affix the cable but i can throw in some cable tie bases if you want (you need to use liquid metal or drill and tap/pop rivet them on.

the speedo kits come in two flavours. one is for people with scottoilers or equivalent and the other is for those without.

at the moment i only have enough adjuster plates to do a few kits which i need to sell to get some funds in the kitty to get more stock as its all laid out on the speedo kits and Gizmos as well as just putting in an order for more vacuum extension parts

Jayneflakes · 26-02-15, 09:23 AM

Quote:

Originally Posted by Bibio

the speedo kits come in two flavours. one is for people with scottoilers or equivalent and the other is for those without.

I can confirm that the mounting plate is beautifully made and up to the standard that we have come to expect from Lance, the rotors are also exquisite and the whole package looks and runs better than factory.

As is usual for Lance's custom parts this stuff is plug and play and has made the front end of my bike look uncluttered and very tidy. I have routed the cable along the pipe of my oiler out the back using zip ties to hold it in place and then up through the frame following the clutch cable to the plug at the front.

The fitting job if done at a gentle pace takes no more than a couple of hours if you stop for a tea break in the middle, have a chat with your friends and then take some time to swap the sounds over on the stereo. Most of you will have it done a lot faster than I did, but I was photographing the process along the way.

I would like to thank Lance for a beautiful and intuitive kit and let every one know that that it is simple and just works. That boy gets a hug when I finally meet him, all three of my nipples are tingling at the thought!

Zim · 26-02-15, 11:26 PM

Quote:

Originally Posted by Bibio

at the moment i only have enough adjuster plates to do a few kits which i need to sell to get some funds in the kitty to get more stock as its all laid out on the speedo kits and Gizmos as well as just putting in an order for more vacuum extension parts

Juster+oiler available Lance?

Bibio · 26-02-15, 11:37 PM

nope not at the moment. i only have enough for my speedo kits which is 4 pairs. once i have sold the 4 kits then i'll have enough funds to get more cut and fettled.

TBH i was going to stop ding them as i have pretty much sold enough that almost every member has a pair fitted already but i decided that i might as well keep people happy.

i was hoping that the folk over on svrider would like them but seems they weren't interested for some obscure reason. they would rather buy a TRE (which does nowt but placebo) at $30 than my adjusters at $30 which would keep their chain more in line giving longer chain and sprocket life.. hey ho.

Bibio · 26-02-15, 11:41 PM

Quote:

Originally Posted by Jayneflakes

That boy gets a hug when I finally meet him, all three of my nipples are tingling at the thought!

thanks Jayne i've now got a vision of total recall in my head now

Zim · 27-02-15, 12:45 AM

Quote:

Originally Posted by Bibio

nope not at the moment. i only have enough for my speedo kits which is 4 pairs. once i have sold the 4 kits then i'll have enough funds to get more cut and fettled.

If it helps you to get your projects off the ground I'm happy to cough up, up front, in the knowledge they'll turn up one day when you're good and ready.

Bibio · 27-02-15, 01:13 AM

thanks for the kind offer but thats not how i work, now if 100 people were to offer i might just consider it... lol

i'll endeavour to get stock as soon as i can as i will need more for the other 40 speedo rotors i have to make kits up anyway. i'm just hoping my laser profiler up the road is still willing to cut them for me... we shall see

Bibio · 09-03-15, 04:57 PM

finally after 3 years of faffing about and testing the pointy speedo conversion kits are here. i have tested the 8 pulse on mine and it works perfect.

at the moment i have 1 x 8 pulse (white rev counter face on clocks) kit and 1 x 4 pulse (black rev counter face on clocks) kit with two more next weekend.

the rest will depend on my wallet and how quick these sell as i need to get more sensors and brackets.

i'll try and get some pictures up later on tonight.

Bibio · 09-03-15, 04:59 PM

update.. i have just remembered i only have 1 8 pulse as both the 4 pulse are booked.

Bibio · 09-03-15, 05:23 PM

here is a quick pic of the kit installed on my bike. excuse the messy oily stuff but its a bike.. its meant to be oily

and for our cousins in the USA that are reading this yes i am brain_out on svrider.

25-02-15, 11:05 PM	#91
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: svbits.co.uk showcase i'll have kits ready mid next week. the kit has everything including the adjuster plates. the only thing i dont supply is something to affix the cable but i can throw in some cable tie bases if you want (you need to use liquid metal or drill and tap/pop rivet them on. the speedo kits come in two flavours. one is for people with scottoilers or equivalent and the other is for those without. at the moment i only have enough adjuster plates to do a few kits which i need to sell to get some funds in the kitty to get more stock as its all laid out on the speedo kits and Gizmos as well as just putting in an order for more vacuum extension parts

26-02-15, 11:37 PM	#94
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: svbits.co.uk showcase nope not at the moment. i only have enough for my speedo kits which is 4 pairs. once i have sold the 4 kits then i'll have enough funds to get more cut and fettled. TBH i was going to stop ding them as i have pretty much sold enough that almost every member has a pair fitted already but i decided that i might as well keep people happy. i was hoping that the folk over on svrider would like them but seems they weren't interested for some obscure reason. they would rather buy a TRE (which does nowt but placebo) at $30 than my adjusters at $30 which would keep their chain more in line giving longer chain and sprocket life.. hey ho.

27-02-15, 01:13 AM	#97
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: svbits.co.uk showcase thanks for the kind offer but thats not how i work, now if 100 people were to offer i might just consider it... lol i'll endeavour to get stock as soon as i can as i will need more for the other 40 speedo rotors i have to make kits up anyway. i'm just hoping my laser profiler up the road is still willing to cut them for me... we shall see

09-03-15, 04:57 PM	#98
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: svbits.co.uk showcase finally after 3 years of faffing about and testing the pointy speedo conversion kits are here. i have tested the 8 pulse on mine and it works perfect. at the moment i have 1 x 8 pulse (white rev counter face on clocks) kit and 1 x 4 pulse (black rev counter face on clocks) kit with two more next weekend. the rest will depend on my wallet and how quick these sell as i need to get more sensors and brackets. i'll try and get some pictures up later on tonight.

09-03-15, 04:59 PM	#99
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: svbits.co.uk showcase update.. i have just remembered i only have 1 8 pulse as both the 4 pulse are booked.

09-03-15, 05:23 PM	#100
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: svbits.co.uk showcase here is a quick pic of the kit installed on my bike. excuse the messy oily stuff but its a bike.. its meant to be oily and for our cousins in the USA that are reading this yes i am brain_out on svrider.