done the home made undertray thing

above is my idea-- not too artistic am I??.

indicators out of the side-
wire feeding up from indis where orange stripes are .. fed neatly through rear of hole that the number plate bracket goes through- then zip tied with real thin ties to the arms of the plate bracket...

reflector-- original one.! set below the plate- on a piece(and painted) of angle iron

LED's shining down where the white dots are above the number plate..


should all come together well I hope.. well we will see.. ha ha will put the above projeced idea and finsihed article next to each other tommorow when complete( hopefully)

not too bad a place to to work on a bike.. nice big sheddy thing and a trickling pond-- big TV inside and fridge of beer- no need to go to the house at all !!..






oh yea- I started on

my high level pipe too.. whilst the paint was drying

ok quiff this maybe a sillt question but when it comes to the mot is all that legal or will u have to revert to stock? remember im a newbie

far as I know its legal..

u mean the undertray ot the exhaust..!?


exhaust is a scorpion- I just put the stock one on for MOT.. which is a pain.. he knows I have the orig one - he always done my MOT-
wont even let me take it in bag to show him- HAS to be on the bike- boooooo


as for the undertray mefinks is OK cos LEDs in white on it- and will have the reflector also.

Was thinking under tray. im the same got my mot earlier this week had to take my art can off for an hour then put it back on. then but hey its illegal lol

others have done it and its fine

it will have indis and rear light is same

will have reflector and will have lights onto plate- so should be fine

hi quiff did u paint the metzeler name like that looks cool

Dave, Where are your bungee hangers Was just wondering what you are going to bolt the can too I assume you have cut the bungee hangers off

Looks like your doing a fine job on the back end build. Look forward to seeing the end result. Don't forget to put gromets round the holes you have drilled for the wires, otherwise they could chaff and short out.

Originally Posted by Quiff Wichard

nice job Mr Quiff!! but ive noticed a good inch or so of tyre your not using?

Originally Posted by BigApe

Dave, Where are your bungee hangers Was just wondering what you are going to bolt the can too I assume you have cut the bungee hangers off

Looks like your doing a fine job on the back end build. Look forward to seeing the end result. Don't forget to put gromets round the holes you have drilled for the wires, otherwise they could chaff and short out.

aha !! u noticed my error Mr Ape.!..had to fashion a shorter hangar cos yea I angle grinded the bungess off- I thought they ruined the lines..

ta forthe grommet tip. I havent done that.. so I must.. never thought of it- now u got me worried- want to go out and buy grommetts right now...


it i all done now- after much swearin and cutting of spacers so that the can didnt touch my indis...

got some pics but off the in laws now.. will pop em up laters.