SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
Hi all
I bought a '03 pointy a few weeks ago and the guy I bought it from had removed the indicators at some point. He had put them back on but butchered the wiring in the process. I decided to solder ,shrink wrap and tape up the cut wires for several reasons. 1. When the bike was ticking over the brake light leds would flicker as if there was something draining them....Once I soldered the wires for the indicators this sorted that problem. 2. When soldering up the indicator wires I noticed 1 white 2 pin connector(black with white stripe and brown wires going to the connector) that doesnt seemed to be connected to anything and I cant find anything nearby that it can be connected to...I have attached a picture of the connector...any ideas what this connector is for or what it should be connected to? 3. When I turn on either of my indicators(including hazards) the top half of my brake leds flash also...is this normal? 4. Finally the wiring loom going to the fuse box etc...seems to be free from wherever it should be secured to...where should the fuse box be secured? Thanks Pic of my pride and joy ![]() ![]() ![]() ![]() |
![]() |
![]() |
#2 | |
Guest
Posts: n/a
|
![]() Quote:
3. Mine does that at idle I think. 4. Should mount on little plastic lugs under the riders seat, just above the main fuse/starter relay hth |
|
![]() |
![]() |
#3 |
Trinity
Mega Poster
Join Date: Jun 2006
Location: Guildford
Posts: 8,027
|
![]()
i don't think I've got that connector
![]() ![]() 4 pics trying to show you the fuse box. ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
if u have a tail tidy then it will be the connector for the numberplate light
|
![]() |
![]() |
#5 |
Trinity
Mega Poster
Join Date: Jun 2006
Location: Guildford
Posts: 8,027
|
![]()
3. +1 mine does that
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
![]()
Apologies - now I look at the pics again I can see the tail cluster connector so I don't know what the spare one is either! I think I have a plug near the dealer connector, but I'm not sure it isn't one of those earth bundle things.
But the fuse box definitely should be mounted on plastic lugs under the riders seat. Nothing wrong with moving it, but that's the place for a K3. |
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
I was gonna say your tax disc was on the wrong side but then saw where you were - dunno if you have the same rule
![]() |
![]() |
![]() |
#8 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#9 |
Guest
Posts: n/a
|
![]() |
![]() |
![]() |
#10 |
Trinity
Mega Poster
Join Date: Jun 2006
Location: Guildford
Posts: 8,027
|
![]()
tax disc in the uk should be on the left i.e visible from the pavement by law, just because no one's complained about you doing it different doesn't make it legal
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wiring | george650 | SV Talk, Tuning & Tweaking | 2 | 08-08-08 04:24 PM |
quick Pointy wiring loom question | chunkytfg | SV Talk, Tuning & Tweaking | 1 | 07-02-08 07:36 PM |
wiring up an LED | ljharmitt | SV Talk, Tuning & Tweaking | 9 | 09-11-07 12:06 PM |
FAO gsxr front end pointy owners. clip on clearance issues | ianofbhills | SV Talk, Tuning & Tweaking | 10 | 05-09-06 04:59 PM |
pointy wiring diagram | suzook | SV Talk, Tuning & Tweaking | 4 | 14-02-06 08:08 AM |