DataTool S4 Parts - where from? - SV650.org

22-01-11, 03:06 PM

Hi Everyone,

Right so i've been working on my bike and whilst putting everything back together I have now lost a small part of my alarm.

for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it.

I rang up the place where i got it fitted but they have advised me to go to Datatool and suprise suprise no number just a stupid contact us thing.

Does anyone know if i can get a spare one. Checked EvilBay and cannot find anything unless i buy a whole kit (No Ta)

Cheers

JT

22-01-11, 03:19 PM

It sounds like the trigger switch. You can get a new one from Datatool.

22-01-11, 05:02 PM

Quote:

Originally Posted by B1k3R

It sounds like the trigger switch. You can get a new one from Datatool.

The only pic i could possible find for it was this. Its the little thing square box on the bottom left. If that is deffo the trigger switch thats brill and can get a new one.

22-01-11, 05:57 PM

I can't see from that picture.

TSM · 22-01-11, 06:29 PM

its a standard magnetic switch for the rear seat, any NO type is ok
motion sensor is within the alarm itself

23-01-11, 07:43 PM

Quote:

Originally Posted by TSM

its a standard magnetic switch for the rear seat, any NO type is ok
motion sensor is within the alarm itself

I take it that i can get a new one from Datatool aswell. Soo Annoyed i lost my original one. Stupid question but what do you mean by NO type is ok????

Sorry im new to all of this.

23-01-11, 08:14 PM

Quote:

Originally Posted by turnerj_2001

Stupid question but what do you mean by NO type is ok????

If you'd like to turn something OFF when the two halves of your switch are apart, buy the NORMALLY-OPEN (NO) type; to turn something ON when the two halves are apart, buy the NORMALLY-CLOSED (NC) type, and yes Datatool should sell 'em.

yorkie_chris · 23-01-11, 08:54 PM

Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch

TSM · 23-01-11, 09:17 PM

Quote:

Originally Posted by yorkie_chris

Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch

Quote:

for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it.

this is what he wrote

yorkie_chris · 23-01-11, 09:20 PM

My mistake sorry.

I may have one on an old loom actually.

22-01-11, 03:06 PM	#1
turnerj_2001 Guest Posts: n/a	DataTool S4 Parts - where from? Hi Everyone, Right so i've been working on my bike and whilst putting everything back together I have now lost a small part of my alarm. for those who have them fitted I believe it could be either the ground or the motion "nudge" sensor. It's a tiny box shape that was screwed in on the metal under my pillion grab handle with 2 wires coming out of it. I rang up the place where i got it fitted but they have advised me to go to Datatool and suprise suprise no number just a stupid contact us thing. Does anyone know if i can get a spare one. Checked EvilBay and cannot find anything unless i buy a whole kit (No Ta) Cheers JT

22-01-11, 03:19 PM	#2
B1k3R Guest Posts: n/a	Re: DataTool S4 Parts HELPPPP It sounds like the trigger switch. You can get a new one from Datatool.

22-01-11, 05:57 PM	#4
B1k3R Guest Posts: n/a	Re: DataTool S4 Parts HELPPPP I can't see from that picture.

22-01-11, 06:29 PM	#5
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: DataTool S4 Parts HELPPPP its a standard magnetic switch for the rear seat, any NO type is ok motion sensor is within the alarm itself __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

23-01-11, 08:54 PM	#8
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: DataTool S4 Parts - where from? Are you sure? In pic the box (no wires coming out of it) looks more like the magnet than the magnetic switch __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

23-01-11, 09:20 PM	#10
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: DataTool S4 Parts - where from? My mistake sorry. I may have one on an old loom actually. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Datatool snitcher?	SUPERSTARDJ01	Bikes - Talk & Issues	0	14-11-09 06:28 PM
Datatool problems. Help please.	D Two Nine	Bikes - Talk & Issues	7	23-10-09 03:56 PM
Datatool system 3 PIN?	nobby	SV Talk, Tuning & Tweaking	15	23-03-09 10:17 PM
Datatool S4 Alarm	COLZO	Bikes - Talk & Issues	3	13-03-09 12:40 PM
Help! Plz.. Datatool	keeny90	Bikes - Talk & Issues	18	03-08-08 09:15 PM