SV650 Throttle Cables for Bar Conversion

A set (pair) of genuine Suzuki Throttle Cables for 2003 onwards. Ideal for a raised bar conversion on your pointy.

Bought these as I was intending to raise the handle bar position on my 650s by fitting a naked or aftermarket top yoke and fit raised clip ons or standard bars, but sold the bike instead.

Longer than the standard SV650S cables and are required if you intend to raise your riding positionse of your 650s.

Maybe not the cheapest you can get but they are genuine Suzuki parts and not cheap sticky copies.

Brand new unused £25 the pair posted.

Part Numbers
58300-16GA0
58300-16GB0

Note: if doing this conversion you will also need to use the Naked Throttle Grip Housing (handle bar end)

Open to sensible offers before Flea Baying them

will you take 20 posted

Originally Posted by davepreston

will you take 20 posted

Hi davepreston.......... I have PM'd you.

Parts Still Available.... As no payment recieved from Davepreston.

[Bibio]

those part numbers will not fit the S version throttle housing. they are N cables that will only fit N throttle housing which is completely different from the Sport.

Just to be clear...

If doing a proper bar conversion and using these cable you will also need to use the N throtttle tube assy, which is best anyway as the cables will then exit the tube and route axactly as the N version does eliminating the risk of snagging or sticking.