Help needed with restricted sv - SV650.org

03-03-07, 01:28 PM

Hi,
I own a sv 650 carb version & it's restricted. I want to derestrict it but there are no washers under the carbs & the sliders are also without a hole. Is there any other way that dealers used to restrict a sv? Ignitor maybe?
Help me!!!

TSM · 03-03-07, 01:48 PM

If there are no washers then it will be the sliders, you can only see the hole if you take the sliders out of the carbs.

http://forums.sv650.org/showthread.php?t=62081

rictus01 · 03-03-07, 01:48 PM

I've not seen any other way of restricting a curvy,are you sure it's not between the head and the rubber boot ?

After that I'd guess at either the carbs themselves or exhaust, I'm not aware of any restricted ignition units for this model.

Cheers Mark.

03-03-07, 02:04 PM

I took the sliders out & there are no holes in them (except the 3mm hole in the bottom). I suppose the washer you mentioned would narrow the intake but there is no such thing & the intake hole is the same size all the way to the valves.

03-03-07, 06:08 PM

SV650.ORG FAQ's and How To's.......

03-03-07, 01:28 PM	#1
gixxxerfreak Guest Posts: n/a	Help needed with restricted sv Hi, I own a sv 650 carb version & it's restricted. I want to derestrict it but there are no washers under the carbs & the sliders are also without a hole. Is there any other way that dealers used to restrict a sv? Ignitor maybe? Help me!!!

03-03-07, 01:48 PM	#2
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: Help needed with restricted sv!!! If there are no washers then it will be the sliders, you can only see the hole if you take the sliders out of the carbs. http://forums.sv650.org/showthread.php?t=62081 __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

03-03-07, 01:48 PM	#3
rictus01 Member Mega Poster Join Date: Jul 2003 Location: South London Posts: 9,799	Re: Help needed with restricted sv!!! I've not seen any other way of restricting a curvy,are you sure it's not between the head and the rubber boot ? After that I'd guess at either the carbs themselves or exhaust, I'm not aware of any restricted ignition units for this model. Cheers Mark. __________________ Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!

03-03-07, 02:04 PM	#4
gixxxerfreak Guest Posts: n/a	Re: Help needed with restricted sv!!! I took the sliders out & there are no holes in them (except the 3mm hole in the bottom). I suppose the washer you mentioned would narrow the intake but there is no such thing & the intake hole is the same size all the way to the valves.

03-03-07, 06:08 PM	#5
M1TCH Guest Posts: n/a	Re: Help needed with restricted sv!!! SV650.ORG FAQ's and How To's.......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can they tell it's not restricted?	GeneticBubble	Bikes - Talk & Issues	214	25-03-09 12:45 PM
K8 restricted ecu	Whitehouse	SV Talk, Tuning & Tweaking	2	21-01-09 12:20 PM
ECU - SK3 (Non Restricted)	bobit69	Stuff Wanted	0	29-05-07 09:54 AM
where to buy a restricted ECU?	hangalldjs	SV Talk, Tuning & Tweaking	7	19-01-07 01:07 PM
Restricted her, restricted there.	graeme1841	SV Talk, Tuning & Tweaking	6	10-07-05 01:09 PM