23-04-12, 02:07 PM | #111 |
Member
Mega Poster
Join Date: Jul 2006
Location: Dundee
Posts: 4,405
|
Re: Potential pointy Adjuster Plates Group Buy
|
23-04-12, 02:19 PM | #112 | |
Member
Mega Poster
Join Date: Jun 2008
Location: West Lancs
Posts: 4,055
|
Re: Potential pointy Adjuster Plates Group Buy
Quote:
I think that you owe me a pint to thank me for the reverse psychology I implemented in order to make people think you would only produce 25 and therefore encourage them to commit their support sooner |
|
23-04-12, 02:24 PM | #113 |
Junior Member
Join Date: Apr 2009
Posts: 25
|
Re: Potential pointy Adjuster Plates Group Buy
any chance of putting my name down for a set of non scottoiler or is it too late
|
23-04-12, 02:29 PM | #114 |
Member
Mega Poster
Join Date: Jul 2005
Location: Dunfermline
Posts: 1,712
|
Re: Potential pointy Adjuster Plates Group Buy
You should really do some spares just in case. btw lance look at the amount of views.
__________________
Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed. |
23-04-12, 03:23 PM | #115 | |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,541
|
Re: Potential pointy Adjuster Plates Group Buy
Quote:
starting to think that... might invest some spare cash and give ebay a try |
|
23-04-12, 03:31 PM | #116 | |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,541
|
Re: Potential pointy Adjuster Plates Group Buy
Quote:
1...joshwalker094.......Non-Scottoiler (Post to Nobbylad) 2...DarrenSV650S........ 3...Epic Monkey......... 4...MJC-DEV.............Non-Scottoiler 5...Nobbylad............ (Post to Nobbylad) 6...muzikill............ 7...The Guru............Non-Scottoiler 8...The Guru............Non-Scottoiler 9...fluffer.............Non-Scottoiler 10..Kilted Ginger....... 11..Turner.............. 12..Jayneflakes......... 13..SIII................ 14..peterco............. 15..tetol............... 16..twinset.............Non-Scottoiler 17..Davy.h..............Non-Scottoiler 18..Speedy..............Non-Scottoiler 19..Shawthing...........Non-Scottoiler (Post to Nobbylad) 20..Sputnik............. 21..Elliott Woodruff....Non-Scottoiler (Post to Nobbylad) 22..Steve_God........... (Post to Nobbylad) 23..SirBarnz............Non-Scottoiler 24..federer............. 25..originlabs..........Non-Scottoiler 26..Artful.............. 27..Speedyctr...........Non-Scottoiler 28..ImplodedHamster.....Non-Scottoiler 29..Soulkiss............ 30..whistler............ 31..AkiraSV............ 32.. Beetrootkiller 33.. SV..al...non scottoiler...Anglesey 34.. CodeJACK............Non-Scottoiler 35.. Aidan........ 36.. speareig............Non-Scottoiler done.. anyone looking and thinking about buying you have a few weeks before they are done. once i get them cut then its the weekend of that same week they will be ready. i will stress now that if i get more done and they go on ebay the price will be higher Lance |
|
23-04-12, 04:02 PM | #117 |
Member
Mega Poster
Join Date: Jun 2008
Location: West Lancs
Posts: 4,055
|
Re: Potential pointy Adjuster Plates Group Buy
I reckon you should look at 50 for your first run, you're bound to shift a few via ebay/SVRider.
As for dodging the bar, I will gladly buy you a pint when you're next in the North West of England, in fact, if you hand delivered the plates, I'd buy you two pints |
23-04-12, 07:12 PM | #118 |
Member
Join Date: Apr 2008
Posts: 378
|
Re: Potential pointy Adjuster Plates Group Buy
No..Name................Type............ Post to
1...joshwalker094.......Non-Scottoiler (Post to Nobbylad) 2...DarrenSV650S........ 3...Epic Monkey......... 4...MJC-DEV.............Non-Scottoiler 5...Nobbylad............ (Post to Nobbylad) 6...muzikill............ 7...The Guru............Non-Scottoiler 8...The Guru............Non-Scottoiler 9...fluffer.............Non-Scottoiler 10..Kilted Ginger....... 11..Turner.............. 12..Jayneflakes......... 13..SIII................ 14..peterco............. 15..tetol............... 16..twinset.............Non-Scottoiler 17..Davy.h..............Non-Scottoiler 18..Speedy..............Non-Scottoiler 19..Shawthing...........Non-Scottoiler (Post to Nobbylad) 20..Sputnik............. 21..Elliott Woodruff....Non-Scottoiler (Post to Nobbylad) 22..Steve_God........... (Post to Nobbylad) 23..SirBarnz............Non-Scottoiler 24..federer............. 25..originlabs..........Non-Scottoiler 26..Artful.............. 27..Speedyctr...........Non-Scottoiler 28..ImplodedHamster.....Non-Scottoiler 29..Soulkiss............ 30..whistler............ 31..AkiraSV............ 32.. Beetrootkiller 33.. SV..al...non scottoiler...Anglesey 34.. CodeJACK............Non-Scottoiler 35.. Aidan........ 36.. speareig............Non-Scottoiler 37. lazymanc..........Non-Scottoiler Cheers! |
23-04-12, 07:27 PM | #119 |
Member
Mega Poster
Join Date: Jul 2008
Location: Sheffield
Posts: 10,274
|
Re: Potential pointy Adjuster Plates Group Buy
I'd be after a non scottoiler one depending on cost
Cheers
__________________
|
23-04-12, 07:36 PM | #120 |
Member
Mega Poster
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,541
|
Re: Potential pointy Adjuster Plates Group Buy
someone hasn't read the thread
they are £12 a pair Dave... saying that it all depends on how i get on this week with the laser cutters. if i can get a good price out of them then i will gladly drop the price for everyone. as i said at the start i'm not out to make profit from org members out of this i'm doing it because i can. Lance |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
potential pointy ecu restrictor kit bargain | haydensv650 | Stuff Wanted | 0 | 18-08-11 07:40 PM |
Replacement chain adjuster plates? | SV400Rob | SV Talk, Tuning & Tweaking | 13 | 02-02-11 09:30 PM |
chocolate chain adjuster plates | dmracing | SV Talk, Tuning & Tweaking | 6 | 01-08-09 09:23 PM |
Chain adjuster plates | dmracing | Stuff Wanted | 6 | 24-07-07 05:54 PM |
Stainless adjuster plates.....................bling | svrash | SV Talk, Tuning & Tweaking | 19 | 23-04-06 07:22 PM |