Group buy - Pointy infills & bracket for seat cowl - Page 8 - SV650.org

31-10-13, 06:36 AM

No progress, lack of interest.

Bibio · 31-10-13, 04:48 PM

tell you what since the dark days of winter are upon us then if nikon is not interested then i'll do them but it will be a cppl months.

easy peasy to do the bracket but i will have to make moulds of the infills.

i'll order up some mould silicone next week and see how the infills go. if they are too much of a ballache then i'll dump the idea.

if they turn out ok then i'll add them to my website as an ongoing stock item.

LewSpeight · 31-10-13, 05:15 PM

Thanks bibs, very good idea. Keep us posted

Sent from my Xperia Z via Tapatalk

richardah · 01-11-13, 01:59 PM

I just need the bracket as I have the infills.

01-11-13, 02:28 PM

Thanks for taking over bibs, can't justify the time if people not interested in buying. Moulds did not come out that good when I did it, so I ended up drawing up a CAD graphic to print using 3d printer.

The bracket I mocked up was perfect, tricky part was the crease when the seat part goes.

Good luck!

Bibio · 01-11-13, 03:19 PM

if your on about the strengthening ridges then they are not needed, the bracket is only there to hook the tab under so it wont come off. if your putting the seat on then you put the grab rail on.

i will be selling as a whole kit and not bits&pieces.

01-11-13, 03:46 PM

Yeah that's what I found also. The bracket is not strong enough for the seat only the cowl.

LewSpeight · 24-02-14, 12:18 AM

Any updates Lance? I'm welcome to be a prototype tester

Sent from my C6603 using Tapatalk

Bibio · 24-02-14, 04:36 AM

nope nothing as yet as i had forgot all about it.

11-06-14, 01:49 PM

Just curious if you are still fabricating the bracket with infills?

31-10-13, 06:36 AM	#71
nikon70 Guest Posts: n/a	Group buy - Pointy infills & bracket for seat cowl No progress, lack of interest.

31-10-13, 04:48 PM	#72
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,561	Re: Group buy - Pointy infills & bracket for seat cowl tell you what since the dark days of winter are upon us then if nikon is not interested then i'll do them but it will be a cppl months. easy peasy to do the bracket but i will have to make moulds of the infills. i'll order up some mould silicone next week and see how the infills go. if they are too much of a ballache then i'll dump the idea. if they turn out ok then i'll add them to my website as an ongoing stock item.

31-10-13, 05:15 PM	#73
LewSpeight Member Mega Poster Join Date: Nov 2012 Location: Halifax, UK Posts: 1,167	Re: Group buy - Pointy infills & bracket for seat cowl Thanks bibs, very good idea. Keep us posted Sent from my Xperia Z via Tapatalk __________________ BREAKING MY SV - CLICKY CLICKY You laugh at me because i am different.. ....................................I laugh harder because you are all the same.

01-11-13, 01:59 PM	#74
richardah Member Join Date: Feb 2013 Location: Ipswich Posts: 53	Re: Group buy - Pointy infills & bracket for seat cowl I just need the bracket as I have the infills. __________________ 2005 SV650s K5 Red, full faring

01-11-13, 02:28 PM	#75
nikon70 Guest Posts: n/a	Group buy - Pointy infills & bracket for seat cowl Thanks for taking over bibs, can't justify the time if people not interested in buying. Moulds did not come out that good when I did it, so I ended up drawing up a CAD graphic to print using 3d printer. The bracket I mocked up was perfect, tricky part was the crease when the seat part goes. Good luck!

01-11-13, 03:19 PM	#76
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,561	Re: Group buy - Pointy infills & bracket for seat cowl if your on about the strengthening ridges then they are not needed, the bracket is only there to hook the tab under so it wont come off. if your putting the seat on then you put the grab rail on. i will be selling as a whole kit and not bits&pieces.

01-11-13, 03:46 PM	#77
nikon70 Guest Posts: n/a	Group buy - Pointy infills & bracket for seat cowl Yeah that's what I found also. The bracket is not strong enough for the seat only the cowl.

24-02-14, 12:18 AM	#78
LewSpeight Member Mega Poster Join Date: Nov 2012 Location: Halifax, UK Posts: 1,167	Re: Group buy - Pointy infills & bracket for seat cowl Any updates Lance? I'm welcome to be a prototype tester Sent from my C6603 using Tapatalk __________________ BREAKING MY SV - CLICKY CLICKY You laugh at me because i am different.. ....................................I laugh harder because you are all the same.

24-02-14, 04:36 AM	#79
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,561	Re: Group buy - Pointy infills & bracket for seat cowl nope nothing as yet as i had forgot all about it.

11-06-14, 01:49 PM	#80
gtmow00 Guest Posts: n/a	Re: Group buy - Pointy infills & bracket for seat cowl Just curious if you are still fabricating the bracket with infills?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bracket for grab rail infills for seat cowl (pointy)	richardah	Stuff Wanted	2	13-08-13 09:04 PM
Pointy rear seat cowl infills	Dave_es94	For Sale - SV's and SV related items	5	19-10-12 01:51 PM
pointy seat cowl infills help.	beno987	SV Talk, Tuning & Tweaking	5	23-01-11 08:49 PM
Pointy Seat Cowl Infills	scoosh-89	For Sale - SV's and SV related items	4	26-11-10 12:55 PM
Pointy Seat Cowl with infills	rob13	For Sale - SV's and SV related items	10	22-08-08 10:19 PM