Pointy "S" clearout - SV650.org

Geordie Mick · 30-12-15, 10:20 PM

No longer got either of my SVs and need some storage space for other, erm, projects. So I have (pics on request by PM or email):

OEM screen - from sk6 - very good condition: £10 posted

Front Fairing "chin piece"/skirt thing - few light scrapes: £10 posted

Clutch perch - no switch, but good condition: £5 posted

Front sub loom - very good: £5 posted

Radiator end covers - very good: £5 posted

Front axle - good: £5 posted

Lower yoke/stem - some surface rust and top nuts have seen better days: £10 posted

Rear disc - bit flakey paint but usable: £10 posted

Rear light unit - decent - £10 posted

Rear mudguard/snowplough - very good: £10 posted

Number plate light - very good: £5 posted

OEM snorkel/air box inlet - £5 posted

Rear shock - not bad: £10 posted

Mick..

30-12-15, 11:07 PM

I've got a SK3 and the back left peg is a little bent so would happily take the set from you, I'm Dunfermline but work in Edinburgh so could pick up.

What's the chin thing you have?

robertw95 · 31-12-15, 12:50 AM

I'm interested in the rear hugger please

Geordie Mick · 31-12-15, 09:13 AM

Quote:

Originally Posted by robertw95

I'm interested in the rear hugger please

Rob - you again (I'm the bloke that came to see your zx6r the other week).

This is the oem mudguard/undertray, not a hugger. Not sure that'll have a home on your supertwin - yours if you want it though.

Mick..

Geordie Mick · 31-12-15, 10:00 AM

Quote:

Originally Posted by TheWeeSteev

I've got a SK3 and the back left peg is a little bent so would happily take the set from you, I'm Dunfermline but work in Edinburgh so could pick up.

What's the chin thing you have?

WeeSteev - I work in Leith so sure we can arrange summat. The peg on the lhs one's not the best, so might be worth swapping the peg from yours onto it.

The top fairing has a black plastic panel that goes under it (kind of around the lower yoke).

Mick..

31-12-15, 10:06 AM

Cheers for the info Mick, I'll meet up to get that peg set next week if that's okay? I'm back in my office on Tuesday (I'm at the bottom of Holyrood Road beside Dynamic Earth.

The old peg is in good nick but I came off the bike down the Grassmarket a couple of months back and while fitting a new tail tidy I spotted that the left hand side pegs were bent from that slide.

I'll double check the chin section, I'm certain that bits okay on my wee bike though.

Geordie Mick · 31-12-15, 10:12 AM

Cool - I'm back on 6th. I'll put them in the car so I've got them with me for whenever.

Mick..

robertw95 · 31-12-15, 01:41 PM

Ahh small world, your right im after the rear hugger cheers anyway.

Geordie Mick · 07-01-16, 02:29 PM

List updated

MICK..

07-08-16, 03:50 PM

Hi Mick,

I don't suppose you could PM me a photo of the grab handle please, if it's still for sale?

Would you be able to post?

Thanks,

Tom

30-12-15, 10:20 PM	#1
Geordie Mick Member Join Date: Jun 2011 Location: Dalkeith Posts: 290	Pointy "S" clearout No longer got either of my SVs and need some storage space for other, erm, projects. So I have (pics on request by PM or email): OEM screen - from sk6 - very good condition: £10 posted Front Fairing "chin piece"/skirt thing - few light scrapes: £10 posted Clutch perch - no switch, but good condition: £5 posted Front sub loom - very good: £5 posted Radiator end covers - very good: £5 posted Front axle - good: £5 posted Lower yoke/stem - some surface rust and top nuts have seen better days: £10 posted Rear disc - bit flakey paint but usable: £10 posted Rear light unit - decent - £10 posted Rear mudguard/snowplough - very good: £10 posted Number plate light - very good: £5 posted OEM snorkel/air box inlet - £5 posted Rear shock - not bad: £10 posted Mick.. __________________ 2003 ZX6R b1h track bike project 1994/97 Ducati 750SS Project Previously: SV650 SK3 cafe racer, SV650 SK6 (track bike), VTR1000F, VFR800 VTEC (x2), SPRINT 1050, VTR1000F (track bike), XT660X, ZX6-R, CB500, VFR750 FL, City Fly 125, GS450, GS500E, NS125R, DT50MX. Last edited by Geordie Mick; 12-08-16 at 07:31 PM.

30-12-15, 11:07 PM	#2
TheWeeSteev Guest Posts: n/a	Re: Pointy "S" clearout I've got a SK3 and the back left peg is a little bent so would happily take the set from you, I'm Dunfermline but work in Edinburgh so could pick up. What's the chin thing you have?

31-12-15, 12:50 AM	#3
robertw95 Member Join Date: Jan 2014 Posts: 39	Re: Pointy "S" clearout I'm interested in the rear hugger please

31-12-15, 10:06 AM	#6
TheWeeSteev Guest Posts: n/a	Re: Pointy "S" clearout Cheers for the info Mick, I'll meet up to get that peg set next week if that's okay? I'm back in my office on Tuesday (I'm at the bottom of Holyrood Road beside Dynamic Earth. The old peg is in good nick but I came off the bike down the Grassmarket a couple of months back and while fitting a new tail tidy I spotted that the left hand side pegs were bent from that slide. I'll double check the chin section, I'm certain that bits okay on my wee bike though.

31-12-15, 10:12 AM	#7
Geordie Mick Member Join Date: Jun 2011 Location: Dalkeith Posts: 290	Re: Pointy "S" clearout Cool - I'm back on 6th. I'll put them in the car so I've got them with me for whenever. Mick.. __________________ 2003 ZX6R b1h track bike project 1994/97 Ducati 750SS Project Previously: SV650 SK3 cafe racer, SV650 SK6 (track bike), VTR1000F, VFR800 VTEC (x2), SPRINT 1050, VTR1000F (track bike), XT660X, ZX6-R, CB500, VFR750 FL, City Fly 125, GS450, GS500E, NS125R, DT50MX.

31-12-15, 01:41 PM	#8
robertw95 Member Join Date: Jan 2014 Posts: 39	Re: Pointy "S" clearout Ahh small world, your right im after the rear hugger cheers anyway.

07-01-16, 02:29 PM	#9
Geordie Mick Member Join Date: Jun 2011 Location: Dalkeith Posts: 290	Re: Pointy "S" clearout List updated MICK.. __________________ 2003 ZX6R b1h track bike project 1994/97 Ducati 750SS Project Previously: SV650 SK3 cafe racer, SV650 SK6 (track bike), VTR1000F, VFR800 VTEC (x2), SPRINT 1050, VTR1000F (track bike), XT660X, ZX6-R, CB500, VFR750 FL, City Fly 125, GS450, GS500E, NS125R, DT50MX.

07-08-16, 03:50 PM	#10
spooon Guest Posts: n/a	Re: Pointy "S" clearout Hi Mick, I don't suppose you could PM me a photo of the grab handle please, if it's still for sale? Would you be able to post? Thanks, Tom

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single Seat Cowl """damaged"""	lechatenetpat	For Sale - SV's and SV related items	8	05-12-12 03:03 PM
"33bhp?" Yes "i dont believe you, I'll seize your bike and take you to court"	Flameboy	SV Talk, Tuning & Tweaking	936	20-10-10 07:06 AM
eye ball yellow "n" and a blue "s" curvey!!!	cymroboi	The Border Patrol	5	19-06-09 08:09 PM
Using "Pointy" Tensioners in a "Curvy"?	dtr125	SV Talk, Tuning & Tweaking	25	05-02-09 05:42 PM
teh "what you doing this weekend thread"...sponsored by Chesley "Sully" Sullenberger the Third	keithd	Idle Banter	30	18-01-09 11:47 AM