K3 Side Stand - Specific to this model? - SV650.org

CodeJACK · 09-02-16, 02:26 PM

I have a K3 with a side stand that is rusting through and become very shakey around its pivot.

Are all the stands the same geometry/length?

I know the K3 has a different/higher rear but don't think it should affect the side stand, just the subframe height.

Anyone know for sure if I can fit a K9 stand to my K3?

DarrenSV650S · 09-02-16, 05:55 PM

It's a different part number for the actual arm, but the mount and everything else is the same. It might just be a slightly different length causing a different lean angle

http://partsfish.com/oemparts/a/suz/...307243ff/stand

http://partsfish.com/oemparts/a/suz/...b876945c/stand

CodeJACK · 11-02-16, 01:02 PM

Quote:

Originally Posted by DarrenSV650S

It's a different part number for the actual arm, but the mount and everything else is the same. It might just be a slightly different length causing a different lean angle

http://partsfish.com/oemparts/a/suz/...307243ff/stand

http://partsfish.com/oemparts/a/suz/...b876945c/stand

Cheers Darren. I can pick one up off ebay for 20 quid so might chance the newer model and see if it will fit.

CodeJACK · 03-09-16, 07:01 PM

Finally got round to sorting this. Got a newer model side stand and its identical in fit and length and angle to the frame. Only difference is the single foot bar as opposed to the u shaped foot bar on my old one.

03-09-16, 07:43 PM

Are the part numbers listed on that american site the same as the UK?

09-02-16, 02:26 PM	#1
CodeJACK Member Join Date: Sep 2007 Location: Dublin, Ireland Posts: 243	K3 Side Stand - Specific to this model? I have a K3 with a side stand that is rusting through and become very shakey around its pivot. Are all the stands the same geometry/length? I know the K3 has a different/higher rear but don't think it should affect the side stand, just the subframe height. Anyone know for sure if I can fit a K9 stand to my K3? __________________ http://www.flickr.com/photos/52990092@N05/

09-02-16, 05:55 PM	#2
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,405	Re: K3 Side Stand - Specific to this model? It's a different part number for the actual arm, but the mount and everything else is the same. It might just be a slightly different length causing a different lean angle http://partsfish.com/oemparts/a/suz/...307243ff/stand http://partsfish.com/oemparts/a/suz/...b876945c/stand

03-09-16, 07:01 PM	#4
CodeJACK Member Join Date: Sep 2007 Location: Dublin, Ireland Posts: 243	Re: K3 Side Stand - Specific to this model? Finally got round to sorting this. Got a newer model side stand and its identical in fit and length and angle to the frame. Only difference is the single foot bar as opposed to the u shaped foot bar on my old one. __________________ http://www.flickr.com/photos/52990092@N05/

03-09-16, 07:43 PM	#5
500tie Guest Posts: n/a	Re: K3 Side Stand - Specific to this model? Are the part numbers listed on that american site the same as the UK?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with side stand	Bigcol187	SV Talk, Tuning & Tweaking	0	19-06-15 11:01 PM
bypassing clutch switch and side stand on 2010 model?	cmjhs	SV Talk, Tuning & Tweaking	7	19-10-11 09:09 AM
Anyone got a left side rear set and side stand?	Dhayn	Stuff Wanted	6	17-08-09 10:08 AM
Side Stand	Giffer2	SV Talk, Tuning & Tweaking	3	23-06-07 07:38 PM
Storage: Side stand or rear paddock stand?	Maudster	SV Talk, Tuning & Tweaking	19	20-01-07 04:45 PM