Main Connector for Clock on wiring loom broken.

[cbay]

Originally Posted by yorkie_chris

There's a dooberry on the back of those you need to flip up first.
Connector body is same on GSXRK1-3 so you can use those, pinout is different though so be careful.

Most likely is connector is fine but there's a bit of rot on one of the pins, you can clean them or nip the female bit slightly to get better contact.

Yes it has the two part flip up to stop them falling out etc but one has snapped off in the accident so it doesn't hold all the connectors in now.

Originally Posted by cbay

Yes it has the two part flip up to stop them falling out etc but one has snapped off in the accident so it doesn't hold all the connectors in now.

Can't you just stick the 'iffy' one with silicone or the like?

Follow your wiring loom back about 15 inches, I'm sure the bit your on about plugs into the main loom somewhere near the headstock of the frame, u just need to buy that bit

[cbay]

Possibly but I don't want to mess it all up and then have to scrap it all off if it doesn't work.. I'd rather just buy an old wiring loom and take the connector off.

[yorkie_chris]

Try PM "Ter" on here he's got 'uggins of GSXR bits.