GSXR rearsets on pointy? - Page 2 - SV650.org

rowdy · 22-07-11, 06:10 PM

None listed in his shop nobbylad. Seen some from hkdrpro that look alright, the ones I checked the feedback out for. They are £140 delivered, but then there is the possibility customs will get hold and clobber for import duty. They are for gsxr600/750 k4/5, I have seen a thread on here where it is mentioned gsxr750 k4 fit without modification, but to be honest I am leaning more towards gbmoto ones, as they are produced (I believe having driven passed his house yesterday) in the fellas garage and I'm all for supporting local business.

Nobbylad · 22-07-11, 06:11 PM

The GBMoto ones seem highly recommended and IIRC are around £140 new anyway.

I was looking at these with a view to widening the holes to fit mine, but when I did all the measurements it looked like the m/c would be an issue and the pegs would be too far back (compared to the GBMotos etc).

http://www.ebay.co.uk/itm/CNC-Rearse...-/230512990347

rowdy · 22-07-11, 06:21 PM

They were £140 a while back, now £175. To be expected really with the price of metal on the increase.

Nobbylad · 22-07-11, 06:23 PM

Crikey!

These look similar to GBMoto http://www.ebay.co.uk/itm/Rearset-Su...item3a67e77c53

EDIT: Actually they look totally different from an adjustment point of view.

rowdy · 22-07-11, 06:23 PM

Blimey they are cheap nobbylad. However it states you will recieve all parts shown in the pictures, so now gear shift linkage rod I pressume.

22-07-11, 06:29 PM

my GB moto ones are great after changing the bearings for stainless double shielded ones rather than steel single shield

Nobbylad · 22-07-11, 06:30 PM

From what I've read (mostly SVRider.com) you need the stock Gixer shift rod as it's longer. I think I have a Valter Moto shift rod that might do, however sure you could either get one from a breakers/ebay or even get one made up cheap at a tooling/metalworkers place. It's just a metal rod with normal thread one end and opposite thread the other. Rose joints etc (if needed) can be had cheap off ebay.

22-07-11, 06:38 PM

i can make the rods at work with rod ends+boots but probs cheaper to buy some

Nobbylad · 22-07-11, 06:39 PM

Surely it's cheaper for you to supply them for nowt?

22-07-11, 06:43 PM

cant do it for free and as i have to manually turn/mill it

22-07-11, 06:10 PM	#11
rowdy Member Join Date: Apr 2008 Posts: 615	Re: GSXR rearsets on pointy? None listed in his shop nobbylad. Seen some from hkdrpro that look alright, the ones I checked the feedback out for. They are £140 delivered, but then there is the possibility customs will get hold and clobber for import duty. They are for gsxr600/750 k4/5, I have seen a thread on here where it is mentioned gsxr750 k4 fit without modification, but to be honest I am leaning more towards gbmoto ones, as they are produced (I believe having driven passed his house yesterday) in the fellas garage and I'm all for supporting local business. __________________ Silver pointy sk3, tail tidy, single seat cowl, fairing lowers, smoke double bubble screen, carbon hugger and front mudguard, full race M4 system, K&N filter, GSXR1000K2 forks, wheel and discs, GSXR750 calipers, HEL braided lines, TL1000s clip-ons, Gilles rearsets, Chinese cnc levers, led indies.

22-07-11, 06:11 PM	#12
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR rearsets on pointy? The GBMoto ones seem highly recommended and IIRC are around £140 new anyway. I was looking at these with a view to widening the holes to fit mine, but when I did all the measurements it looked like the m/c would be an issue and the pegs would be too far back (compared to the GBMotos etc). http://www.ebay.co.uk/itm/CNC-Rearse...-/230512990347 Last edited by Nobbylad; 22-07-11 at 06:13 PM.

22-07-11, 06:21 PM	#13
rowdy Member Join Date: Apr 2008 Posts: 615	Re: GSXR rearsets on pointy? They were £140 a while back, now £175. To be expected really with the price of metal on the increase. __________________ Silver pointy sk3, tail tidy, single seat cowl, fairing lowers, smoke double bubble screen, carbon hugger and front mudguard, full race M4 system, K&N filter, GSXR1000K2 forks, wheel and discs, GSXR750 calipers, HEL braided lines, TL1000s clip-ons, Gilles rearsets, Chinese cnc levers, led indies.

22-07-11, 06:23 PM	#14
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR rearsets on pointy? Crikey! These look similar to GBMoto http://www.ebay.co.uk/itm/Rearset-Su...item3a67e77c53 EDIT: Actually they look totally different from an adjustment point of view. Last edited by Nobbylad; 22-07-11 at 06:26 PM.

22-07-11, 06:23 PM	#15
rowdy Member Join Date: Apr 2008 Posts: 615	Re: GSXR rearsets on pointy? Blimey they are cheap nobbylad. However it states you will recieve all parts shown in the pictures, so now gear shift linkage rod I pressume. __________________ Silver pointy sk3, tail tidy, single seat cowl, fairing lowers, smoke double bubble screen, carbon hugger and front mudguard, full race M4 system, K&N filter, GSXR1000K2 forks, wheel and discs, GSXR750 calipers, HEL braided lines, TL1000s clip-ons, Gilles rearsets, Chinese cnc levers, led indies.

22-07-11, 06:29 PM	#16
barwel1992 Guest Posts: n/a	Re: GSXR rearsets on pointy? my GB moto ones are great after changing the bearings for stainless double shielded ones rather than steel single shield

22-07-11, 06:30 PM	#17
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR rearsets on pointy? From what I've read (mostly SVRider.com) you need the stock Gixer shift rod as it's longer. I think I have a Valter Moto shift rod that might do, however sure you could either get one from a breakers/ebay or even get one made up cheap at a tooling/metalworkers place. It's just a metal rod with normal thread one end and opposite thread the other. Rose joints etc (if needed) can be had cheap off ebay.

22-07-11, 06:38 PM	#18
barwel1992 Guest Posts: n/a	Re: GSXR rearsets on pointy? i can make the rods at work with rod ends+boots but probs cheaper to buy some

22-07-11, 06:39 PM	#19
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: GSXR rearsets on pointy? Surely it's cheaper for you to supply them for nowt?

22-07-11, 06:43 PM	#20
barwel1992 Guest Posts: n/a	Re: GSXR rearsets on pointy? cant do it for free and as i have to manually turn/mill it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gilles Pointy SV Rearsets	Typhoon	For Sale - SV's and SV related items	17	29-11-10 03:48 PM
GSXR rearsets for SK3 650?	baldricc	SV Talk, Tuning & Tweaking	4	22-02-10 06:36 PM
Gsxr rearsets	dizzyblonde	SV Talk, Tuning & Tweaking	17	06-01-08 05:01 PM
GSXR Hangers/rearsets	mgilbe	SV Talk, Tuning & Tweaking	4	04-06-07 09:53 PM
SV Pointy Rearsets & Radiator	Steve_God	Stuff Wanted	5	15-05-07 06:18 PM