Stainless Bolt Kit - opinions? - Page 2 - SV650.org

01-12-12, 09:45 PM

hi do you have link to chews site as im going to replace mine over winter
thanks

02-12-12, 09:02 AM

Great kit. Good instructions, and it makes a considerable cosmetic difference to the look/condition of the bike.

link here

LewSpeight · 10-01-13, 06:31 PM

I've just got one of these, not really what i was expecting. The main bolts i was after in this kit were the bolts that hold the little black fairing cap/panel things on, (which arent) and the bolts that hole the handlebars on. (or are they already stainless?)
Didnt look too immensely at them as theyre the only bolts i initially needed.

Am i missing something really obvious here?

Zim · 11-01-13, 09:40 AM

From what I can see Chewy does an "Engine Kit" and a "Bike Kit". His bike kits are itemised here (pointy) and here (curvy). Both should have the handlebar clamp bolts, but neither mention the fairing. I see he also has a page for lower fairing washers. Aren't the fairing panels held in with screws rather than bolts? They're probably more likely to be stainless (I would have thought, don't quote me!).

LewSpeight · 12-01-13, 01:55 AM

Yeh but look, 'left handle bar clamp = 1 bolt', and same for right, but i swear the handlebar clamps have two bolts on each side...?

Bibio · 12-01-13, 01:49 PM

your bike is a naked so yes two bolts either side for the clamps. these are completely different from clipon bolts that you get with the S kit

LewSpeight · 12-01-13, 01:58 PM

Oh that didn't even cross my mind.
That sucks. I'm really regretting buying this kit

Bibio · 13-01-13, 01:10 AM

drop chewie an email and tell him it was for a naked. i'm sure he will pop 4 in the post for you.

also the black screws that hold the triangle infill panel on the upper cowling are just that, screws so not classified as bolts.

LewSpeight · 13-01-13, 01:12 AM

****. Haha okay cheers lance I'll give it a shot

01-12-12, 09:45 PM	#11
craig dow Guest Posts: n/a	Re: Stainless Bolt Kit - opinions? hi do you have link to chews site as im going to replace mine over winter thanks

02-12-12, 09:02 AM	#12
Heefy Guest Posts: n/a	Re: Stainless Bolt Kit - opinions? Great kit. Good instructions, and it makes a considerable cosmetic difference to the look/condition of the bike. link here Last edited by Heefy; 02-12-12 at 09:03 AM.

10-01-13, 06:31 PM	#13
LewSpeight Member Mega Poster Join Date: Nov 2012 Location: Halifax, UK Posts: 1,167	Re: Stainless Bolt Kit - opinions? I've just got one of these, not really what i was expecting. The main bolts i was after in this kit were the bolts that hold the little black fairing cap/panel things on, (which arent) and the bolts that hole the handlebars on. (or are they already stainless?) Didnt look too immensely at them as theyre the only bolts i initially needed. Am i missing something really obvious here? __________________ BREAKING MY SV - CLICKY CLICKY You laugh at me because i am different.. ....................................I laugh harder because you are all the same.

11-01-13, 09:40 AM	#14
Zim Member Join Date: Oct 2012 Location: Gloucestershire Posts: 130	Re: Stainless Bolt Kit - opinions? From what I can see Chewy does an "Engine Kit" and a "Bike Kit". His bike kits are itemised here (pointy) and here (curvy). Both should have the handlebar clamp bolts, but neither mention the fairing. I see he also has a page for lower fairing washers. Aren't the fairing panels held in with screws rather than bolts? They're probably more likely to be stainless (I would have thought, don't quote me!). __________________ Suzuki SV650S K9 Kawasaki ZZR 400 Yamaha XV535 Yamaha YB100 Last edited by Zim; 11-01-13 at 09:41 AM. Reason: grammar!

12-01-13, 01:55 AM	#15
LewSpeight Member Mega Poster Join Date: Nov 2012 Location: Halifax, UK Posts: 1,167	Re: Stainless Bolt Kit - opinions? Yeh but look, 'left handle bar clamp = 1 bolt', and same for right, but i swear the handlebar clamps have two bolts on each side...? __________________ BREAKING MY SV - CLICKY CLICKY You laugh at me because i am different.. ....................................I laugh harder because you are all the same.

12-01-13, 01:49 PM	#16
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Stainless Bolt Kit - opinions? your bike is a naked so yes two bolts either side for the clamps. these are completely different from clipon bolts that you get with the S kit

12-01-13, 01:58 PM	#17
LewSpeight Member Mega Poster Join Date: Nov 2012 Location: Halifax, UK Posts: 1,167	Oh that didn't even cross my mind. That sucks. I'm really regretting buying this kit __________________ BREAKING MY SV - CLICKY CLICKY You laugh at me because i am different.. ....................................I laugh harder because you are all the same.

13-01-13, 01:10 AM	#18
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Stainless Bolt Kit - opinions? drop chewie an email and tell him it was for a naked. i'm sure he will pop 4 in the post for you. also the black screws that hold the triangle infill panel on the upper cowling are just that, screws so not classified as bolts.

13-01-13, 01:12 AM	#19
LewSpeight Member Mega Poster Join Date: Nov 2012 Location: Halifax, UK Posts: 1,167	****. Haha okay cheers lance I'll give it a shot __________________ BREAKING MY SV - CLICKY CLICKY You laugh at me because i am different.. ....................................I laugh harder because you are all the same.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Drill out a knackered stainless bolt?	DarrenSV650S	SV Talk, Tuning & Tweaking	35	31-12-11 11:43 AM
Stainless steel bolt suppliers?	barwel1992	Bikes - Talk & Issues	27	29-11-10 01:11 PM
Stainless Steel bolt kit-Full Kit---Curvy SOLD	21QUEST	For Sale - SV's and SV related items	6	10-03-08 11:22 AM
Stainless Bolt kit - Help!	BaggaZee	SV Talk, Tuning & Tweaking	16	18-11-04 07:34 PM
Full stainless bolt kits	BaggaZee	SV Talk, Tuning & Tweaking	29	15-10-04 03:05 PM