Renthal handlebars on a faired Curvey?

Originally Posted by trudd

Yes, just need to cut the screen but I found the bars too far back and too high so ended up taking the fairing off and doing the full conversion to naked and preferred Renthal Ultra lows.
The main reason for doing these mods was to help with Motogymkhana so I wanted the ability to adjust the position. As it turns out I prefer in-line 4s!!! So I now have a Fazer and the SV is back to standard and ready to sell.

does that mean you have the bits i need for sale ?
PM me if you have please.

Sorry but you're a few weeks late.

Originally Posted by trudd

Sorry but you're a few weeks late.

bugger

[Jayneflakes]

Why not use lay back risers?

It worked on my pointy.



The lay back risers raise the bar by four inches and lay it back by two, the effect of this was that the bars can turn on full lock and do not touch any other part of the bike, it does come close though.

If it worked on my pointy, it may well work on your curvy, but my not being a curvy owner means that I could not say for sure.

so the risers are bolt on then, not part of the yoke ?

Yes, the risers are bolted on but the yoke from a naked bike is different. Its not simply a drilled 'S' yoke.

The yoke shown in my picture is from an unfaired bike. I think a few have drilled an S yoke but have added some strengthening material to the mount points.

Thanks fellas, i will look out for a yoke from naked model then.

[maviczap]

Risers

http://www.ebay.co.uk/itm/3-pull-bac...item2a2a8e1ca9

Originally Posted by maviczap

Risers

http://www.ebay.co.uk/itm/3-pull-bac...item2a2a8e1ca9

Thanks mav, but i'm thinking of using fatbars. I just happen to have some going spare in my shed