New CNC Stainless Bar Ends

Look sweet but I got a black framed K5

Greg,

You need to find someone with a powder coater.

You could make a mint selling black ones.....

G

Originally Posted by toonyank

Did you buy from me? What's you ebay handle? Anyway yeh they look great I just got my 02 curvey and I just can't get the trottle side end off to replace it's really stuck on there and the phillips screw is getting bad.

I don't want to hack saw the old ones off I'd like to keep them.

Greg

I had this with mine. Find a drill bit and drill the head of the screw off. This will allow the bar end to come off leaving the remainder of the screw visible. Take one pair of pliers/mole grips and unscrew the screw. Roberts your mothers brother!

Nudge!!

I've got custom CNC stainless bar ends.

I made these for my powervalve and worked and looked so well that I made a few more to share.

These work great for SVs curvey or pointy

£16.00 inc postage puts them through your letter box.

Do you have to keep the rubber bit inside? Cos my bar ends are a bit naff but the rubber bit inside is also perished and it's not keeping them wedged in enough.

Originally Posted by Warthog

Do you have to keep the rubber bit inside? Cos my bar ends are a bit naff but the rubber bit inside is also perished and it's not keeping them wedged in enough.

I'm afraid so. The naked version doesn't have a solid end with a tapped thread as the faired version does. You could probably replace the rubber bungs though. Anyway I would have to supply you with a longer screw to go through that and the nut at the end.

I've now got one set left.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...1683&rd=1&rd=1

Originally Posted by toonyank

I've now got one set left.

http://cgi.ebay.co.uk/ws/eBayISAPI.d...1683&rd=1&rd=1

I bought a set from you off ebay top quailty
Just need to get longer screws for them.. can you help

Bought under the name dave0

Cheers

Originally Posted by Oggs

I bought a set from you off ebay top quailty
Just need to get longer screws for them.. can you help

Bought under the name dave0

Cheers

Yes I can, did you buy these for a naked SV? If so then you will have the type with the rubber bung and nut yeh? You need a 60mm long bolt which I can send you.

Originally Posted by toonyank

Yes I can, did you buy these for a naked SV? If so then you will have the type with the rubber bung and nut yeh? You need a 60mm long bolt which I can send you.

No I bought them for a full faired SV