SV650.org - SV650 & Gladius 650 Forum



East Anglian Revolution If you're based in East Anglia, then this could be for you.

Reply
 
Thread Tools
Old 18-01-11, 04:37 PM   #2781
kaivalagi
Member
Mega Poster
 
Join Date: Jun 2010
Location: Norwich
Posts: 1,955
Default Re: 'Ere 'ere is the EAR Megathread

Guys,

Changing the subject slightly, I'm looking for a top yoke nut with a hole or open top so I can use a ram mount dead centre (no room to fit what I have on the clip ons)

I've been to GB Motorcycle breakers (Cawston) and J B Motorsports (Reepham) and found nothing, only 1mm thread stuff...

I begrudge paying silly money for a nut (~£20 quote for genuine Suzuki or £12 for pro-bolt anodised),, especially as I may well put some riser bars (topyoke kit) on it later down the line once I've done some good miles this year and will ram mount on the bars then anyway.

Any ideas? I think the nut needs to be M24 (32mm external) with a 1.5mm thread right? Any other places you know of worth trying? I can't believe I can't even find a used gsx-r nut as I think they fit too.

I am wondering whether I should just center punch the one I have and drill it...I just don't like the idea of doing it!

Last edited by kaivalagi; 18-01-11 at 04:38 PM.
kaivalagi is offline   Reply With Quote
Old 18-01-11, 04:37 PM   #2782
kaivalagi
Member
Mega Poster
 
Join Date: Jun 2010
Location: Norwich
Posts: 1,955
Default Re: 'Ere 'ere is the EAR Megathread

double post
kaivalagi is offline   Reply With Quote
Old 18-01-11, 04:39 PM   #2783
speedplay
Guest
 
Posts: n/a
Default Re: 'Ere 'ere is the EAR Megathread

Quote:
Originally Posted by kaivalagi View Post
Guys,

Changing the subject slightly, I'm looking for a top yoke nut with a hole or open top so I can use a ram mount dead centre (no room to fit what I have on the clip ons)

I've been to GB Motorcycle breakers (Cawston) and J B Motorsports (Reepham) and found nothing, only 1mm thread stuff...

I begrudge paying silly money for a nut (~£20 quote for genuine Suzuki or £12 for pro-bolt anodised),, especially as I may well put some riser bars (topyoke kit) on it later down the line once I've done some good miles this year and will ram mount on the bars then anyway.

Any ideas? I think the nut needs to be M24 (32mm external) with a 1.5mm thread right? Any other places you know of worth trying? I can't beleive I can't even find a used gsx-r nut as I think they fit too.

I am wondering whether I should just center punch the one I have and drill it...I just don't like the idea of doing it!
Quote:
Originally Posted by kaivalagi View Post
double post

So in need of help you'll post it twice...
  Reply With Quote
Old 18-01-11, 04:39 PM   #2784
maviczap
Member
Mega Poster
 
maviczap's Avatar
 
Join Date: Mar 2007
Posts: 9,097
Default Re: 'Ere 'ere is the EAR Megathread

I may have a manky GSXR one somewhere, I'll have a look.

It'll enhance the look of your Pointy
__________________
We're riding out tonight to case the promised land
Make everyday count
RIP Reeder - Jolly Green Giant and comedy genius
maviczap is offline   Reply With Quote
Old 18-01-11, 05:42 PM   #2785
Rob969
Guest
 
Posts: n/a
Default Re: 'Ere 'ere is the EAR Megathread

Quote:
Originally Posted by reeder View Post
Curvys are horrible. Honestly.
Pointies are so much nicer and I can't comprahend how people cannot see this.
I'm not saying theres anything wrong with pointies but a decent curvy should be within kellyjo's budget a pointy might be stretching it abit. If i was buying my first bike now i'd probably be looking at a newer bike than i've got now which would be a pointy but as my curvy was my first bike i'm bound to have a soft spot for it

plus we all know curvy's are the original and best
  Reply With Quote
Old 18-01-11, 05:42 PM   #2786
kaivalagi
Member
Mega Poster
 
Join Date: Jun 2010
Location: Norwich
Posts: 1,955
Default Re: 'Ere 'ere is the EAR Megathread

Quote:
Originally Posted by speedplay View Post
So in need of help you'll post it twice...
Yeah cause double posts get double the attention lol....no, my internet connection was being sh1te so I whacked the submit button again (I should know better....too much riding today has made me a little impatient)

Quote:
Originally Posted by maviczap View Post
I may have a manky GSXR one somewhere, I'll have a look.

It'll enhance the look of your Pointy
Manky is fine, would make it look more like a curvy too right? I take it back, Curvies are good too...they're all SVs with that lovely forgiving engine. So long as it fits and I can mount a ram ball onto the thing I'd be very grateful. I need a tomtom, using my phones android navigation which needs a network signal and can only be listened to is driving me up the wall.

Last edited by kaivalagi; 18-01-11 at 05:43 PM.
kaivalagi is offline   Reply With Quote
Old 18-01-11, 05:44 PM   #2787
speedplay
Guest
 
Posts: n/a
Default Re: 'Ere 'ere is the EAR Megathread

Quote:
Originally Posted by Rob969 View Post
I'm not saying theres anything wrong with pointies but a decent curvy should be within kellyjo's budget a pointy might be stretching it abit. If i was buying my first bike now i'd probably be looking at a newer bike than i've got now which would be a pointy but as my curvy was my first bike i'm bound to have a soft spot for it

plus we all know black pointys are for gays

Have to agree with you there.

My first road bike was a plack faired curvy.
  Reply With Quote
Old 18-01-11, 05:45 PM   #2788
maviczap
Member
Mega Poster
 
maviczap's Avatar
 
Join Date: Mar 2007
Posts: 9,097
Default Re: 'Ere 'ere is the EAR Megathread

Quote:
Originally Posted by Rob969 View Post
I'm not saying theres anything wrong with pointies but a decent curvy should be within kellyjo's budget a pointy might be stretching it abit. If i was buying my first bike now i'd probably be looking at a newer bike than i've got now which would be a pointy but as my curvy was my first bike i'm bound to have a soft spot for it

plus we all know curvy's are the original and best
No matter how often you say it Rob, KJ is not going to buy another curvy.

As you know she's lost her marbles, and wants an unreliable, thirsty V twin
__________________
We're riding out tonight to case the promised land
Make everyday count
RIP Reeder - Jolly Green Giant and comedy genius
maviczap is offline   Reply With Quote
Old 18-01-11, 05:50 PM   #2789
speedplay
Guest
 
Posts: n/a
Default Re: 'Ere 'ere is the EAR Megathread

cant understand why it has to be a litre twin if our on a buget though..
  Reply With Quote
Old 18-01-11, 05:52 PM   #2790
Rob969
Guest
 
Posts: n/a
Default Re: 'Ere 'ere is the EAR Megathread

thats what i'm thinking if i was in that situation i'd just want to get back on 2 wheels. It'd be cheaper to buy/insure and run. And she gets to polish our helmets on the rideouts i bet reeder can't wait for that little treat
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Madlanders Megathread derbybiker The Madlanders 307 18-09-22 09:47 PM
megathread Frank Idle Banter 10 22-01-08 07:41 PM
GM megathread Mark_h Guildford Massive 5 25-05-07 10:30 AM


All times are GMT. The time now is 04:14 PM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.