Bought My SV a little present :)

Originally Posted by dyziowg

And don't cut the swing arm!

That would cause i small problem

He's off on sabbatical again, but let me quote somebody with strong feelings on the matter...

Originally Posted by stuartyboy

GUYS, GUYS, GUYS...PLEASE...DO NOT use a grinder.

This fitting of the can is a complete absolute utter piece of ****. I kid you not. Get yourself a proper hacksaw (12 inch) with a NEW hacksaw blade and some tape as a guide. It will cut through the pipe like butter. Dry fit everything, take it a part, put some silicone sealant on the joint. Thighten it all up then you are done.

I fitted my exhaust to my K6 in 5 mins it was THAT easy. It was also the first time I'd done it.

If you **** it up with a grinder there's no way back. I'd rather not read any horror stories about the grinder messing up your bike's paintwork.

He made Mr Shonadoll use a hacksaw. Made him.

Just an opinion to consider.

I will take this advice and have a go tomorrow morning

Well that's it on now it never came with a baffle so think i may try to get a hold of one for it! it's rather loud but does sound awesome . I did the cut with a hack saw after removing the foot peg. Originally couldn't see how it would fit but figured it out. Had to lower the rear bracket down a little to clear my indicators. What you guys think?

what does i look like from the back, looks like it may obscure the indicator, which you'll get pulled for i think.

it does a little im currently trying to move the indicators up above the can. Any Suggestions?

Looks good mate

We don't want to hear you're nonsense talk of these baffle things..

[dyzio]

Looks good, shame you couldn't make it today.


EDIT:

Your indicator problem...
I know! Stuby it!

Mmmm stubby.

Originally Posted by Stoneyginger

Any Suggestions?

Put the rocket launcher back on, they're much nicer.