Pennine Massive where are you all? - Page 4 - SV650.org

Dave20046 · 18-01-10, 05:07 PM

Quote:

Originally Posted by Kuze

Its winter i'm not riding anywhere!

I am however slowly modding my bike ready for the summer and anyone around rochdale i shall try to find ye!! O and going rivvy again!

Beowulf can is fitted :P
Next scottoiler (bought not fitted)
Rear hugger, tail tidy and swapped out indis to be done!

Should be completed in the next few months!

(whens paintballing?)

this weekend, think there's still places (people have dropped out)

18-01-10, 05:20 PM

Quote:

Originally Posted by Dave20046

this weekend, think there's still places (people have dropped out)

Damn the one weekend i'm working !

18-01-10, 05:26 PM

Oi, keep the bloody noise down pleeeeease, some of us trying to hibernate over here.

19-01-10, 12:13 PM

Come to work on it today

Bit annoying though, I realise now with a lot of skipping ques of traffic that I still dont have to set up my TB's quite right, a little off/on throttle roughness ~2K RPM

Will ballance throttle tonight to see if its that simple. ha ha.

19-01-10, 04:15 PM

Quote:

Originally Posted by Dave20046

this weekend, think there's still places (people have dropped out)

Aha i might send the missus instead or just come over for drinks halifax yea?

Dave20046 · 19-01-10, 05:14 PM

yeah check out ze thread http://forums.sv650.org/showthread.php?t=137412&page=1

19-01-10, 05:54 PM

Just incase anyone gives a crap... I decided that when I got home I was goin to balance the cylinders, all done! They were a fair amount out! No wonder the throttle felt inaccurate and as though neither cylinder knew what to do at low RPM! Now its back to pulling from tickover in 3rd

On a side note for a V twin I honestly cant believe how smooth the bottom end is! Im sure I couldnt really go below about 3500 rpm on the sv650 without it getting a little lumpy, is my memory right?

20-01-10, 10:41 PM

yeah it has been a long time since i have been out with the awful weather, went on holiday for 3 weeks and it snowed the day i left and the dam stuff was still here when i got back

planning on doing some rear sprocket changes to get a bit more acceleration in the next week or two and then try and get on the bike any days its not to wet and cold.

really want to try and do a track day this year if i get a chance. give me a shout rob if you are heading out sometime and i will see if i can tag along, was talking to a few friends at football who all ride and they are starting to get their bikes ready to ride soon

22-01-10, 10:54 AM

Going back to the parents tomorrow to swap the cage (which is dead) for the SV now the ice has passed.

Got new rear pads, Scorpion end can and quite possibly heated grips to fit then time for a ride!

I also want to sort out some headlight relays, 12v socket for sat nav / phone and maybe upgrade the reg/rec wiring feed as per some stuff I have been reading. Already fitted Night breakers and still want more light!

ophic · 22-01-10, 11:15 AM

Quote:

Originally Posted by ThEGr33k

Just incase anyone gives a crap... I decided that when I got home I was goin to balance the cylinders, all done! They were a fair amount out! No wonder the throttle felt inaccurate and as though neither cylinder knew what to do at low RPM! Now its back to pulling from tickover in 3rd

On a side note for a V twin I honestly cant believe how smooth the bottom end is! Im sure I couldnt really go below about 3500 rpm on the sv650 without it getting a little lumpy, is my memory right?

Fancy helping me balance mine?

18-01-10, 05:26 PM	#33
grh1904 Guest Posts: n/a	Re: Pennine Massive where are you all? Oi, keep the bloody noise down pleeeeease, some of us trying to hibernate over here.

19-01-10, 12:13 PM	#34
ThEGr33k Guest Posts: n/a	Re: Pennine Massive where are you all? Come to work on it today Bit annoying though, I realise now with a lot of skipping ques of traffic that I still dont have to set up my TB's quite right, a little off/on throttle roughness ~2K RPM Will ballance throttle tonight to see if its that simple. ha ha.

19-01-10, 05:14 PM	#36
Dave20046 Member Mega Poster Join Date: Jul 2008 Location: Sheffield Posts: 10,274	Re: Pennine Massive where are you all? yeah check out ze thread http://forums.sv650.org/showthread.php?t=137412&page=1 __________________

19-01-10, 05:54 PM	#37
ThEGr33k Guest Posts: n/a	Re: Pennine Massive where are you all? Just incase anyone gives a crap... I decided that when I got home I was goin to balance the cylinders, all done! They were a fair amount out! No wonder the throttle felt inaccurate and as though neither cylinder knew what to do at low RPM! Now its back to pulling from tickover in 3rd On a side note for a V twin I honestly cant believe how smooth the bottom end is! Im sure I couldnt really go below about 3500 rpm on the sv650 without it getting a little lumpy, is my memory right?

20-01-10, 10:41 PM	#38
nik_nunez Guest Posts: n/a	Re: Pennine Massive where are you all? yeah it has been a long time since i have been out with the awful weather, went on holiday for 3 weeks and it snowed the day i left and the dam stuff was still here when i got back planning on doing some rear sprocket changes to get a bit more acceleration in the next week or two and then try and get on the bike any days its not to wet and cold. really want to try and do a track day this year if i get a chance. give me a shout rob if you are heading out sometime and i will see if i can tag along, was talking to a few friends at football who all ride and they are starting to get their bikes ready to ride soon

22-01-10, 10:54 AM	#39
markc123 Guest Posts: n/a	Re: Pennine Massive where are you all? Going back to the parents tomorrow to swap the cage (which is dead) for the SV now the ice has passed. Got new rear pads, Scorpion end can and quite possibly heated grips to fit then time for a ride! I also want to sort out some headlight relays, 12v socket for sat nav / phone and maybe upgrade the reg/rec wiring feed as per some stuff I have been reading. Already fitted Night breakers and still want more light!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zzz Pennine Massive	Richie	Pennine Massive	13	01-01-10 01:57 PM
Pennine Massive or MIGTS??	Mr UKI	The Madlanders	6	30-11-06 08:41 PM