Mr suzuki's cream cheese bolts

i did went the honda route with my cbr600fw good bike and the finish is better but i got bored and sold it

[yorkie_chris]

Originally Posted by xXBADGERXx

Of course there will always be a bolt that , under no corcumstances , will want to play by the rules . I have one holding a bobbin in on my swingarm and it`s a Horror I can tell you , not even Plusgas and Stilsons will make that puppy move . On a nice day I am going out there with different sized drills and I am going to drill the core of the bolt out as close to 8mm as I can get without touching the thread then I am gonna Plusgas it and use a stud extractor .

I always replace my bolts with Stainless ones as I go along and use some Blue Loctite that looks like a glue stick . I put the bolts back in without overtightening and the Blue Loctite gives it a little extra resistance to coming undone without having to overtighten them .

For first part, if it is a through hole then the bolt may wind out as you drill through.

For the second, I think loctite interrupts the corrosion, so locking the fastener and preventing it siezing too. Cool.