SV650.org - SV650 & Gladius 650 Forum



Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola!
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 10-04-05, 11:01 AM   #41
Warren
Guest
 
Posts: n/a
Default

so here is another question.

what if i get caught with a racecan.

i get a fine and a rectification notice.

once i put the standard can on again, get it checked out.

what happens if i put the race can on again and get caught again ?
  Reply With Quote
Old 10-04-05, 11:12 AM   #42
Cloggsy
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by bikageboy
so here is another question.

what if i get caught with a racecan.

i get a fine and a rectification notice.

once i put the standard can on again, get it checked out.

what happens if i put the race can on again and get caught again ?
I think its a 3 strikes & your out scheme... When you're given a rectification notice, it goes down on record - if you get another one for the same thing, thats 2. The third time its a fine & points...
  Reply With Quote
Old 10-04-05, 09:51 PM   #43
raymond smith
Guest
 
Posts: n/a
Default

sorry frazer, but wot about bsau stamped cans like my wolf
  Reply With Quote
Old 10-04-05, 11:41 PM   #44
wheelnut
Guest
 
Posts: n/a
Default

It says here:

Warning, A test certificate is not evidence that a vehicle is in a satisfactory mechanical condition

Written on the test certificate :P

I think its one of them daft laws that civil servant people make up to justify their jobs.

I am fighting with the Tachograph rules and the new working time directive for mobile workers

one contradicts the other, and the punishment is death, or a big fine
  Reply With Quote
Old 11-04-05, 12:10 AM   #45
northwind
Moderator
Mega Poster
 
northwind's Avatar
 
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,082
Default

Nah, the MOT's not a service or mechanical checkup- it's perfectly possible to have one pass that's got something grievously wrong with it. They put that on to stop idiots buying cars or bikes with wet ink on the MOT and assuming that it must be in good nick (like my ex did)
__________________
"We are the angry mob,
we read the papers every day
We like what we like, we hate what we hate
But we're oh so easily swayed"
northwind is offline   Reply With Quote
Old 11-04-05, 08:13 AM   #46
Patch
Guest
 
Posts: n/a
Default

OK here is my understanding of what is and is not the state of the law based on research since first commenting on this thread. I do not claim that this information is absolutely correct but it is an interperatation of what I can find.

The EU set standards for noise and emissions and any "EU" approved silencer is marked with either an E number or the correct BS number. Ammendments to UK construction and use legislation made it an offence for any retailer to sell a silencer not marked either with an approved E/BS number, the words "not for road use" or as being for bikes that date pre 1985.

The MOT test was ammended to check that the silencer was correctly stamped however this contravenes international trade laws and was ammended last year to a check that the silencer is not stamped Not for Road use and that the noise level is acceptable when compared to other similar bikes.

It is perfectly legal for anyone to purchase a silencer which has an acceptable noise level from say the USA or Aus and fit it to a bike in the UK if it has no stamp.

As far as I can discover (if I am wrong I apologise) there is no law which states that a bike silencer has to be stamped. I may be wrong and so I would ask that any of our boys in blue check and reproduce the ACT and wording of the Act that would make it an offence.

So the situation as I see it is that the police can stop you for a loud exhaust if they hear it and form an opinion that it is louder than is acceptable. They can then issue you with a recitification notice and a £30 on the spot fine. If you accept the fine you have no appeal process. however if your exhaust is baffled and is genuinely not "not for road use" then there is a legal challenge open to you.

Note filing off the not for road use will get you in serious trouble if you then claimed that the silencer was legal.

Where do I sit on this? I have after market silencers fitted to the GS and VFR they are Remus have baffles and neither has any stamp as they are both "grey" imports.
  Reply With Quote
Old 11-04-05, 03:00 PM   #47
fraser01
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by Patch
OK here is my understanding of what is and is not the state of the law based on research since first commenting on this thread. I do not claim that this information is absolutely correct but it is an interperatation of what I can find.

The EU set standards for noise and emissions and any "EU" approved silencer is marked with either an E number or the correct BS number. Ammendments to UK construction and use legislation made it an offence for any retailer to sell a silencer not marked either with an approved E/BS number, the words "not for road use" or as being for bikes that date pre 1985.

The MOT test was ammended to check that the silencer was correctly stamped however this contravenes international trade laws and was ammended last year to a check that the silencer is not stamped Not for Road use and that the noise level is acceptable when compared to other similar bikes.

It is perfectly legal for anyone to purchase a silencer which has an acceptable noise level from say the USA or Aus and fit it to a bike in the UK if it has no stamp.

As far as I can discover (if I am wrong I apologise) there is no law which states that a bike silencer has to be stamped. I may be wrong and so I would ask that any of our boys in blue check and reproduce the ACT and wording of the Act that would make it an offence.

So the situation as I see it is that the police can stop you for a loud exhaust if they hear it and form an opinion that it is louder than is acceptable. They can then issue you with a recitification notice and a £30 on the spot fine. If you accept the fine you have no appeal process. however if your exhaust is baffled and is genuinely not "not for road use" then there is a legal challenge open to you.

Note filing off the not for road use will get you in serious trouble if you then claimed that the silencer was legal.

Where do I sit on this? I have after market silencers fitted to the GS and VFR they are Remus have baffles and neither has any stamp as they are both "grey" imports.
You are correct what you have said Patch, you are always one for indepth research...but although i do not want to insult peoples intellegence i also dont want to confuse people,
You do not legally have to have a BSA or E marking stamped on the exhaust, however as you stated all, the supply of exhausts in the UK must have these markings...i have been told that there are no changes yet in relation to Construction and Use legislation, the only reason that you would not have these markings is if 1. it had stamped not for road use or 2. it was imported outside of the UK....

s.1motorcycle noise act 1987 and regs 3,4 &5 motorcycle silencer and exhaust systems regs 1995

in relation to point 2, the exhaust once fitted will have to conform to the same noise level restrictions already set in the UK...if it does not then this will be illegal (and if a PC thinks that it exceed this then he can issue a VDRS) So basically the majority of people..they will have e markings...if you dont you will be able to prove this with a doc production....

(as i said patch originally i will let you all know if/when the legislation changes...we are sent ammendments..)

I have spoken with my local MOT inspector who states that the laws may have changed MOT wise but they are only bringing them into line with CU legislation.... he stated previously before it was changed someone could pass an MOT with an illegal no. plate and then ride out onto the road and get stuck on by the police....this has now been ammended and so no.plates are part of the inspection....he did say that there are alot of grey areas but these will be ironed out in time.....
I am going to see the MOT guy in the near future to discuss the changes in more detail...and see how that differs from CU leg....over a cuppa of course

Hope this helps..

Sorry been busy on nights....so i will try catch up with any other questions later..

Regards

Fraser
  Reply With Quote
Old 11-04-05, 03:11 PM   #48
Flamin_Squirrel
Guest
 
Posts: n/a
Default

  Reply With Quote
Old 13-04-05, 02:00 PM   #49
Dicky Ticker
Guest
 
Posts: n/a
Default as per

Just to put the cat amongst the pidgeons When your bike was given type approval the levels for the silencers were as follows

Silencer------E4 0192
90dB @ 4500rpm

These are the figures that came off my VIN sticker on the nearside chassis

So, if I don,t have a can fitted that conforms to these specs is my bike illegal ????

Or looking at the other side of the coin as the sticker is on the bike already why do I need one on the can and unless the police have a calibrated decibel meter[ only one in the Essex Traffic Div which hasn't been used for 2yrs] ThereforE any judgement is down to the individual officers "ear" I doubt if anybody can have ears so in tune to as be decibel
calibrated The whole thing MOT/POLICE/LAW is a farce that any good scolicitor would rip to shreads in court

ALL THESE QUESTIONS ------HAS ANYBODY ACTUALLY BEEN DONE?
  Reply With Quote
Old 13-04-05, 03:50 PM   #50
fraser01
Guest
 
Posts: n/a
Default

*Fraser sits on the ledge and coos....*

Did we get out of bed the wrong side this morning?

the 90db info on the VIN is more than likely the max recommended for the particular type of motorcycle, as decided by the manufacturer, also that does'nt stop you changing your exhaust......off the top of my head..so forgive me if i am out..83db was the limit according to construction and use, shedule A i believe. As far as i am aware not even an MOT will measure the decibels and it will be up to the MOT inspectors decision as to whether something is too noisy. As i said this is why i am going to see the MOT guy, so that i can find out exactly what VOSA are saying and how it differs from C&U legislation.

BTW i always advise that you seek legal advice...best practice....

...and its not the question has anyone been done, its the fact people want to know, the people demand answers.....

Good morning,good day and good night!

Fraser :P
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Daytime MOT - Police view DarrenSV650S Bikes - Talk & Issues 30 17-05-09 01:08 AM
Number Plates Dicky Ticker Bikes - Talk & Issues 10 03-04-09 10:41 PM
Number plates Blue_SV650S SV Talk, Tuning & Tweaking 15 05-07-07 03:58 PM
Filtering - police view Jebiah Bikes - Talk & Issues 33 05-05-07 11:40 AM
Number plates big twin grin SV Talk, Tuning & Tweaking 43 27-10-04 06:22 AM


All times are GMT. The time now is 10:34 PM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.