Potential pointy Adjuster Plates Group Buy - Page 5 - SV650.org

Shawthing · 18-04-12, 07:27 PM

Very interested.
My original adjuster plates are already looking jaded (less than three years and 15Kmiles).
Still would like to have bottom alignment hole despite any affect on overall strength. Non Oiler.
Am just down road from JoshW so dont mind being part of a NorthWest group shipment .

SIII · 18-04-12, 07:43 PM

1..joshwalker094....non-scottoiler, with hole
2..DarrenSV650S.....
3..Epic Monkey......
4..MJC-DEV..........non-scotoiler
5..Nobbylad.........
6..muzikill.........
7..The Guru.........Non-Scottoiler
8..The Guru.........Non-Scottoiler
9.. fluffer
10.Kilted Ginger
11. Turner
12. Jayneflakes
13. SIII

muzikill · 18-04-12, 08:18 PM

Manufacture em with the bottom alignment hole as standard theres no fuss that way on orders.

Bibio · 18-04-12, 09:48 PM

Quote:

Originally Posted by Jayneflakes

12. Jayneflakes, but with a simple question.

Will it be compatible with my Tutoro oiler?

I assume that the K3 arm is the same dimensions as the others? Would look well Bling on my sexy little girly bike.

Quote:

Originally Posted by muzikill

My thought exactly ..... If it can use a tutoro its a quality addon.

ok i have no idea how the Tutoro pipework is but if its just simple 6mm clear tubing with a nib on the end then like all the others you would need the bracket to hold the pipework like this one from scottoiler

http://www.scottoiler.com/uk/Spares-...ypage.tpl.html

this then attaches to the oiler plate on the bottom of the adjuster plate.

i have done a rough idea of how the finished item might look.

i'm no photoshop expert

now remember folks the basics are all done and it's up to you how you would like it to look.

there has been questions asked about leaving the hole for the bottom marker. yes i can put a hole there but it cant be as big as the one in the original picture. we tried to do it but the bottom edge is deforming when we are bending the first bend so it will have to be reduced to allow us to bend the bracket properly. the picture above is a rough idea of how big the bottom alignment hole would be and would allow you to still see the alignment marks on the swingarm. if you would like a slot with a marker that can be done but the slot cant be a large one for the reasons above.

the brackets will all be made exactly the same but those wanting an oilier bracket will have theirs spot welded to the bottom face of the left hand bracket. this makes no odds to the finished quality.

peterco · 18-04-12, 10:18 PM

Add to list,
1..joshwalker094....non-scottoiler, with hole
2..DarrenSV650S.....
3..Epic Monkey......
4..MJC-DEV..........non-scotoiler
5..Nobbylad.........
6..muzikill.........
7..The Guru.........Non-Scottoiler
8..The Guru.........Non-Scottoiler
9.. fluffer
10.Kilted Ginger
11. Turner
12. Jayneflakes
13. SIII
14. peterco

Bibio · 18-04-12, 10:28 PM

Add to list,
1..joshwalker094....non-scottoiler, with hole
2..DarrenSV650S.....
3..Epic Monkey......
4..MJC-DEV..........non-scotoiler
5..Nobbylad.........
6..muzikill.........
7..The Guru.........Non-Scottoiler
8..The Guru.........Non-Scottoiler
9..fluffer
10.Kilted Ginger
11.Turner
12.Jayneflakes
13.SIII
14.peterco
15.tetol ???
16.twinset........Non-Scottoiler
17.Davy.h ???
18.Speedy.........Non-Scottoiler
19.Shawthing??

once we start hitting the 30's then i will PM those on the list

Lance

DarrenSV650S · 18-04-12, 11:01 PM

1..joshwalker094....non-scottoiler, with hole
2..DarrenSV650S.....scotoiler, not bothered if it has a hole or not
3..Epic Monkey......
4..MJC-DEV..........non-scotoiler
5..Nobbylad.........
6..muzikill.........
7..The Guru.........Non-Scottoiler
8..The Guru.........Non-Scottoiler
9..fluffer
10.Kilted Ginger
11.Turner
12.Jayneflakes
13.SIII
14.peterco
15.tetol ???
16.twinset........Non-Scottoiler
17.Davy.h ???
18.Speedy.........Non-Scottoiler
19.Shawthing??

18-04-12, 11:40 PM

Quote:

Originally Posted by DarrenSV650S

1..joshwalker094....non-scottoiler, with hole
2..DarrenSV650S.....scotoiler, not bothered if it has a hole or not
3..Epic Monkey......
4..MJC-DEV..........non-scotoiler
5..Nobbylad.........
6..muzikill.........
7..The Guru.........Non-Scottoiler
8..The Guru.........Non-Scottoiler
9..fluffer
10.Kilted Ginger
11.Turner
12.Jayneflakes
13.SIII
14.peterco
15.tetol ???
16.twinset........Non-Scottoiler
17.Davy.h ???
18.Speedy.........Non-Scottoiler
19.Shawthing??

20. Sputnik

I can't quite figure out what's going on with the scottoiler plate in your original picture but stick me down for a pair anyway. Shiny new plates might finally encourage me to fit my old scottoiler!

Oh, and good work Lance!

Edit - oh crap, i screwed up the add name to list thing!

19-04-12, 05:40 AM

Go on then add me to the list

21. Elliott Woodruff - Non-Scottoiler

Any chance of polished stainless?

19-04-12, 05:52 AM

I'm in Bibio

18-04-12, 07:27 PM	#41
Shawthing Member Join Date: May 2011 Location: Manchester Posts: 396	Re: Potential pointy Adjuster Plates Group Buy Very interested. My original adjuster plates are already looking jaded (less than three years and 15Kmiles). Still would like to have bottom alignment hole despite any affect on overall strength. Non Oiler. Am just down road from JoshW so dont mind being part of a NorthWest group shipment . __________________ SK9 Sport Black Delkevic can. Non arbores caesa suum mittere nuntius, sed magnum numerum electrons uehementissime incommo. Last edited by Shawthing; 18-04-12 at 07:29 PM.

18-04-12, 07:43 PM	#42
SIII Member Mega Poster Join Date: Apr 2010 Location: Dumfries and Galloway Posts: 1,319	Re: Potential pointy Adjuster Plates Group Buy 1..joshwalker094....non-scottoiler, with hole 2..DarrenSV650S..... 3..Epic Monkey...... 4..MJC-DEV..........non-scotoiler 5..Nobbylad......... 6..muzikill......... 7..The Guru.........Non-Scottoiler 8..The Guru.........Non-Scottoiler 9.. fluffer 10.Kilted Ginger 11. Turner 12. Jayneflakes 13. SIII __________________ "You know, Scotland has its own martial arts. Yeah, it's called Fuk-U. It's mostly just head butting and then kicking people when they're on the ground" The Stoppy King

18-04-12, 08:18 PM	#43
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Manufacture em with the bottom alignment hole as standard theres no fuss that way on orders. __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

18-04-12, 10:18 PM	#45
peterco Member Join Date: Apr 2006 Location: Alloa,Clackmannanshire,The Wee County Posts: 656	Re: Potential pointy Adjuster Plates Group Buy Add to list, 1..joshwalker094....non-scottoiler, with hole 2..DarrenSV650S..... 3..Epic Monkey...... 4..MJC-DEV..........non-scotoiler 5..Nobbylad......... 6..muzikill......... 7..The Guru.........Non-Scottoiler 8..The Guru.........Non-Scottoiler 9.. fluffer 10.Kilted Ginger 11. Turner 12. Jayneflakes 13. SIII 14. peterco __________________ SV650 Sport in Black MZ saxon tour 301 Previous bikes SV650 Naked BMW 650cs Scarfer MZ RT 125 4 stroke

18-04-12, 10:28 PM	#46
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: Potential pointy Adjuster Plates Group Buy Add to list, 1..joshwalker094....non-scottoiler, with hole 2..DarrenSV650S..... 3..Epic Monkey...... 4..MJC-DEV..........non-scotoiler 5..Nobbylad......... 6..muzikill......... 7..The Guru.........Non-Scottoiler 8..The Guru.........Non-Scottoiler 9..fluffer 10.Kilted Ginger 11.Turner 12.Jayneflakes 13.SIII 14.peterco 15.tetol ??? 16.twinset........Non-Scottoiler 17.Davy.h ??? 18.Speedy.........Non-Scottoiler 19.Shawthing?? once we start hitting the 30's then i will PM those on the list Lance

18-04-12, 11:01 PM	#47
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,414	1..joshwalker094....non-scottoiler, with hole 2..DarrenSV650S.....scotoiler, not bothered if it has a hole or not 3..Epic Monkey...... 4..MJC-DEV..........non-scotoiler 5..Nobbylad......... 6..muzikill......... 7..The Guru.........Non-Scottoiler 8..The Guru.........Non-Scottoiler 9..fluffer 10.Kilted Ginger 11.Turner 12.Jayneflakes 13.SIII 14.peterco 15.tetol ??? 16.twinset........Non-Scottoiler 17.Davy.h ??? 18.Speedy.........Non-Scottoiler 19.Shawthing??

19-04-12, 05:40 AM	#49
Elliott Guest Posts: n/a	Re: Potential pointy Adjuster Plates Group Buy Go on then add me to the list 21. Elliott Woodruff - Non-Scottoiler Any chance of polished stainless?

19-04-12, 05:52 AM	#50
tetol Guest Posts: n/a	Re: Potential pointy Adjuster Plates Group Buy I'm in Bibio

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
potential pointy ecu restrictor kit bargain	haydensv650	Stuff Wanted	0	18-08-11 07:40 PM
Replacement chain adjuster plates?	SV400Rob	SV Talk, Tuning & Tweaking	13	02-02-11 09:30 PM
chocolate chain adjuster plates	dmracing	SV Talk, Tuning & Tweaking	6	01-08-09 09:23 PM
Chain adjuster plates	dmracing	Stuff Wanted	6	24-07-07 05:54 PM
Stainless adjuster plates.....................bling	svrash	SV Talk, Tuning & Tweaking	19	23-04-06 07:22 PM