What have you tinkered with today? - Page 6 - SV650.org

maviczap · 25-08-14, 07:04 AM

Well a busy day yesterday.

Organised and tidied my garage after getting a new tool chest, got rid of one old plastic tool box.

Dumped a load of rubbish.

Tidied the shed too.

Re hung the door on the other shed

Fixed the issue on the headset bearing on my new 29r build

Continued to try and rescue Chris numbers photo's from his HDD

Littlepeahead · 25-08-14, 07:28 AM

I put the SV on the optimate, which is as close as I got to tinkering.... but I had far more fun hand feeding some abandoned kittens my sister is fostering. Pics in photo a day later, these little rascals are far trickier to work on than a bike, they wriggle!

jambo · 25-08-14, 10:21 AM

I found that the cigarette lighter socket in my car was broken and replaced the fuse. To my shame I had to check the Haynes manual to find where such a fuse board might be located.

Jambo

Sent without a real keyboard

Jayneflakes · 25-08-14, 01:49 PM

I have been fiddling with my rear brake calliper to show my step son where to grease them and what with. Well it is a bit nicer than saying that I have been fiddling, with the stepson!

Bibio · 25-08-14, 02:18 PM

i tried mounting my Cam to the screen but it was pizz so i have come up with this...

BTW anyone thinking of buying the USB charging socket i fitted earlier then DONT.. it went pop within a day.

25-08-14, 02:41 PM

Lance, I thought about a similar set up for when I eventually get a camera and had thought about replacing one of the mirror bolts with something like THIS. That way it would allow you to keep the mirror on.

Bibio · 25-08-14, 02:47 PM

i'm off on my jollys on wed mornin so needs done now. that looks like a good idea when i get back though.

i'll test it out later on and if it's a no go then it will be no cam on jollys.

admin · 25-08-14, 03:06 PM

I bled the brakes on the VFR. Brake fluid over 2 years old. Not for the faint hearted.

sent via Pony Express

25-08-14, 11:57 PM

Bib... it looks like youve used a handlebar mount somewhere in there? I was going to try and pad one out with an old bicycle inner tube and clamp to the mirror arms?
Ill have to post my findings if i do try it!

Bibio · 26-08-14, 12:52 AM

yup it was by chance a perfect fit to a RAM triangular 1'' mount. the same mount also fits the mirror base but you have to 'slot' the holes of the mount inwards. i never got out to try it but i will tomorrow when i get up.

the cam is solid but only taking it for a ride will tell.

25-08-14, 07:04 AM	#51
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: What have you tinkered with today? Well a busy day yesterday. Organised and tidied my garage after getting a new tool chest, got rid of one old plastic tool box. Dumped a load of rubbish. Tidied the shed too. Re hung the door on the other shed Fixed the issue on the headset bearing on my new 29r build Continued to try and rescue Chris numbers photo's from his HDD __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

25-08-14, 07:28 AM	#52
Littlepeahead Member Mega Poster Join Date: Feb 2008 Location: The Saaarrrfff Posts: 2,908	Re: What have you tinkered with today? I put the SV on the optimate, which is as close as I got to tinkering.... but I had far more fun hand feeding some abandoned kittens my sister is fostering. Pics in photo a day later, these little rascals are far trickier to work on than a bike, they wriggle! __________________ Tender is the day, The demons go away, Lord I need to find, Someone who can heal my mind...

25-08-14, 10:21 AM	#53
jambo Member Mega Poster Join Date: Aug 2003 Location: Croydonia Posts: 5,376	Re: What have you tinkered with today? I found that the cigarette lighter socket in my car was broken and replaced the fuse. To my shame I had to check the Haynes manual to find where such a fuse board might be located. Jambo Sent without a real keyboard __________________ Modern motorcycles are bloody brilliant, enjoy it while we can

25-08-14, 02:18 PM	#55
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: What have you tinkered with today? i tried mounting my Cam to the screen but it was pizz so i have come up with this... BTW anyone thinking of buying the USB charging socket i fitted earlier then DONT.. it went pop within a day.

25-08-14, 02:41 PM	#56
The Guru Guest Posts: n/a	Re: What have you tinkered with today? Lance, I thought about a similar set up for when I eventually get a camera and had thought about replacing one of the mirror bolts with something like THIS. That way it would allow you to keep the mirror on.

25-08-14, 02:47 PM	#57
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: What have you tinkered with today? i'm off on my jollys on wed mornin so needs done now. that looks like a good idea when i get back though. i'll test it out later on and if it's a no go then it will be no cam on jollys.

25-08-14, 03:06 PM	#58
admin John T Mega Poster Join Date: May 2003 Location: Shrewsbury, Shrops, UK Posts: 2,491	Re: What have you tinkered with today? I bled the brakes on the VFR. Brake fluid over 2 years old. Not for the faint hearted. sent via Pony Express __________________ Admin for this forum and the main site. John@sv650.org

25-08-14, 11:57 PM	#59
DanSp Guest Posts: n/a	Re: What have you tinkered with today? Bib... it looks like youve used a handlebar mount somewhere in there? I was going to try and pad one out with an old bicycle inner tube and clamp to the mirror arms? Ill have to post my findings if i do try it!

26-08-14, 12:52 AM	#60
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,552	Re: What have you tinkered with today? yup it was by chance a perfect fit to a RAM triangular 1'' mount. the same mount also fits the mirror base but you have to 'slot' the holes of the mount inwards. i never got out to try it but i will tomorrow when i get up. the cam is solid but only taking it for a ride will tell.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Been got already today..	454697819	Idle Banter	16	01-04-10 02:08 PM
Today	DaveP	The Border Patrol	4	02-03-10 10:52 AM
Going out today?	tj2	The Border Patrol	1	01-06-09 09:22 PM
Today	Tara	Guildford Massive	14	02-06-08 11:56 AM
Today......	Caddy2000	Idle Banter	15	19-04-06 05:39 PM